837 results
Search Results
Now showing 1 - 10 of 837
Article Citation - WoS: 12Skeletonization-based beam finite element models for stochastic bicontinuous materials: Application to simulations of nanoporous gold(Cambridge Univ Press, 2018) Soyarslan, Celal; Argeso, Hakan; Borgmann, SwantjeAn efficient representative volume element generation strategy is developed in modeling nanoporous materials. It uses periodic 3D beam finite element (FE) models derived from skeletonization of spinodal-like stochastic microstructures produced by a leveled random field. To mimic stiffening with agglomeration of the mass at junctions, an increased Young's modulus is assigned to the elements within the junction zone. The effective Young's modulus, Poisson's ratio, and universal anisotropy index are computed. A good agreement of the Young's modulus predictions with those obtained from experimental results for phase volume fractions 0.20 < phi(B) < 0.50 is observed. Moreover, the elastic anisotropy index of the generated beam networks shows sufficient proximity to isotropy. Finally, it is demonstrated that, as compared to the simulation statistics of voxel-FE models, for the beam-FE models over 500-fold computational acceleration with 250-fold less memory requirement is provided.Article Citation - WoS: 13Citation - Scopus: 13Evaluation of procedural and clinical outcomes of transcatheter aortic valve implantation: A single-center experience(Kare Publ, 2020) Karaduman, Bilge Duran; Kayaoğlu, Hüseyin Ayhan; Keleş, Telat; Bozkurt, EnginObjective: Transcatheter aortic valve implantation (TAVI) is an established alternative to surgical aortic valve replacement. Our study aimed to evaluate the implementation of TAVI at our large-volume center, having an all-comer patient population with short and long-term follow-ups. Methods: This retrospective, single-center analysis included 556 consecutive patients with symptomatic severe aortic stenosis (AS) who underwent TAVI between July 2011 and December 2019. Results: The mean age of the entire population was 77.6±7.9 years, and 54.9% were women. The Society of Thoracic Surgeons (STS) mean score of the cohort was 6.0%±3.5%. The balloon-expandable valve (Sapien XT, Sapien 3; Edwards Lifesciences, Irvine, California) was the most frequently used valves in this cohort (94.6%). Transfemoral access was used in 96.3% of patients. Implantation success was achieved in 96.6% of cases. During the TAVI procedure, 7.2% of patients required permanent pacemaker implantation, with 37.5% in the Lotus valve group needing the most permanent pacemakers. The mean length of hospital stay for the entire cohort was 4.5±2.3 days. Overall, 22 (3.9%) in-hospital deaths occurred before hospital discharge. The mean follow-up period was 15.1±14.9 months for all patients, and a significant improvement was noted in all echocardiographic parameters and functional capacity. Paravalvular leak (PVL) was documented in 18.9% patients, mild in 17.9%, and moderate in 1% at discharge. No cases with severe PVL, necessitating additional procedures. The multiple logistic regression analysis revealed that sex, STS score, baseline SYNTAX score, bicuspid valve morphology, common femoral artery diameter, and post-TAVI PVL were independent predictors of overall mortality. Conclusion: To our knowledge, this study, which is the largest single-center real-world experience of TAVI in Turkey, demonstrated low complication rates with favorable short- and mid-term THV performance in patients undergoing TAVI.Article Investigating of Dynamic Compressive Response of Plain and Fiber-Reinforced Concrete Structures at Various Strain Rates(SAGE Publications Ltd, 2025) Gunay, A.R.; Hafizoglu, H.; Akdeniz, E.; Kaya, C.Across the world, studies on building design are conducted at various scales. The behavior of structures under static loading has been the subject of various studies in the modern era, leading to the development of significant standards and application techniques. However, studies on the behavior of structures under dynamic loading have remained limited. This study investigated the dynamic compressive behavior of plain and fiber-reinforced C60 and C80 concrete samples through experimental studies at room temperature. In addition, this study also investigated dynamic deformation and fracture behavior of plain concrete samples by numerical studies. For this purpose, plain and fiber-reinforced C60 and C80 concrete samples were produced. Experimental studies covered both static and dynamic compression tests. Following the static tests, dynamic test samples with a diameter and length of 10 mm were produced from the static test samples by water jet cutting method and were dynamically compressed in the Split Hopkinson Pressure Bar (SHPB) test setup. Dynamic compression test results showed that the strength of plain and fiber-reinforced C60 and C80 concretes were obtained in the range of 74–162 MPa at an average strain rate of between 139 and 650 s−1. Experimental results also showed that the fiber addition affected the dynamic increase factor (DIF) and impact toughness of both C60 and C80 concretes in a good manner. To compare experimental and numerical results, a dynamic compression test condition was visualized with a high-speed camera and simulated with the Ls-Dyna software using the finite-element method. Numerical studies indicated a good correlation with dynamic compression results in terms of crack formation and fracture progress. © IMechE 2025.Article Citation - WoS: 27Citation - Scopus: 35A Wavelet-Based Feature Set for Recognizing Pulse Repetition Interval Modulation Patterns(Tubitak Scientific & Technological Research Council Turkey, 2016) Gencol, Kenan; At, Nuray; Kara, AliThis paper presents a new feature set for the problem of recognizing pulse repetition interval (PRI) modulation patterns. The recognition is based upon the features extracted from the multiresolution decomposition of different types of PRI modulated sequences. Special emphasis is placed on the recognition of jittered and stagger type PRI sequences due to the fact that these types of PRI sequences appear predominantly in modern electronic warfare environments for some specific mission requirements and recognition of them is heavily based on histogram features. We test our method with a broad range of PRI modulation parameters. Simulation results show that the proposed feature set is highly robust and separates jittered, stagger, and other modulation patterns very well. Especially for the stagger type of PRI sequences, wavelet-based features outperform conventional histogram-based features. Advantages of the proposed feature set along with its robustness criteria are analyzed in detail.Article Citation - WoS: 1Exploring Supportive and Deterrent Factors on Online Shopping in a Developing Country(Igi Global, 2020) Pusatli, Tolga; Akman, IbrahimThis study explores the influence of the reasons of individuals' supportive and deterrent behaviors against commercial usage of online media in the emerging market of Turkey. The supportive and deterrent factors are grouped in empirical categories as discouragement and encouragement, respectively. The impact of these factors on actual behavior were assessed via intermediary empirical category including the variables inefficiency, efficiency, intention, and subjective norm. A survey was conducted using a sample of 251 observations obtained from the visitors of three large/busy malls using purposive sampling. The multiple least-square regression was utilized to test the nature of the relationships between variables. Results indicated a significant discouraging impact of warranty, finance, habits, security on inefficiency perceptions, an encouraging impact of geography and convenience on efficiency perceptions. Significant behavioral impact of perceptions regarding inefficiency, efficiency, subjective norms, and intention on actual usage of online shopping was also observed.Article Citation - WoS: 2Citation - Scopus: 2Low Carbon Architectural Design(Gazi Univ, 2018) Balku, Saziye; Bal Kocyigit, Filiz; Architecture; Energy Systems EngineeringTendency towards sustainable energy resources is increasing and leading engineers and architects make joint efforts. Renewable energy potential present in nature can be used more efficiently so that while energy consumption is reducing, rate of energy gain, on the other hand, increases by architectural design methods. A sailing club in Golbasi, Ankara is designed as a low carbon building for optimum usage of solar and wind energy. It can be concluded using an energy efficient architectural design for a building before its construction makes it possible to meet the electrical and heat energy requirements at minimum cost and environmental friendly.Article Citation - WoS: 9Citation - Scopus: 9Sr addition and its effect on the melt cleanliness of A356(Iop Publishing Ltd, 2020) Atakav, Baturalp; Gursoy, Ozen; Erzi, Eray; Tur, Kazim; Dispinar, DeryaStrontium modification of Al-Si alloys has known to have several beneficial effects such as increased feedability, the formation of fibrous Si and increased mechanical properties. However, in the presence of Sr, during melting and holding durations, the oxide structure of the dross may change which leads to several problems during casting operations. In this work, the amount of Sr was changed and the melt was held for 1 h. Reduced Pressure Test (RPT) was used to asses melt quality change and it was found that cleanliness was increased due to the fading of Sr.Article Citation - WoS: 10Citation - Scopus: 10Higher Rates of Cefiderocol Resistance Among Ndm Producing klebsiella Bloodstream Isolates Applying Eucast Over Clsi Breakpoints(Taylor & Francis Ltd, 2023) Isler, Burcu; Vatansever, Cansel; Ozer, Berna; Cinar, Gule; Aslan, Abdullah Tarik; Falconer, Caitlin; Harris, Patrick N. A.BackgroundCefiderocol is generally active against carbapenem-resistant Klebsiella spp. (CRK) with higher MICs against metallo-beta-lactamase producers. There is a variation in cefiderocol interpretive criteria determined by EUCAST and CLSI. Our objective was to test CRK isolates against cefiderocol and compare cefiderocol susceptibilities using EUCAST and CLSI interpretive criteria.MethodsA unique collection (n = 254) of mainly OXA-48-like- or NDM-producing CRK bloodstream isolates were tested against cefiderocol with disc diffusion (Mast Diagnostics, UK). Beta-lactam resistance genes and multilocus sequence types were identified using bioinformatics analyses on complete bacterial genomes.ResultsMedian cefiderocol inhibition zone diameter was 24 mm (interquartile range [IQR] 24-26 mm) for all isolates and 18 mm (IQR 15-21 mm) for NDM producers. We observed significant variability between cefiderocol susceptibilities using EUCAST and CLSI breakpoints, such that 26% and 2% of all isolates, and 81% and 12% of the NDM producers were resistant to cefiderocol using EUCAST and CLSI interpretive criteria, respectively.ConclusionsCefiderocol resistance rates among NDM producers are high using EUCAST criteria. Breakpoint variability may have significant implications on patient outcomes. Until more clinical outcome data are available, we suggest using EUCAST interpretive criteria for cefiderocol susceptibility testing.Letter Medical Education During the Covid-19 Pandemic: Experience From a Newly Established Medical School(Springer india, 2020) Tulek, Necla; Gonullu, Ugur[No Abstract Available]Article Citation - WoS: 5Citation - Scopus: 6Photoelectronic and Electrical Properties of Tl2ingas4< Layered Crystals(Pergamon-elsevier Science Ltd, 2007) Qasrawi, A. F.; Gasanly, N. M.Tl2InGaS4 layered crystals are studied through the dark electrical conductivity, space charge limited current and illumination- and temperature-dependent photoconductivity measurements in the temperature regions of 220-350 K, 300-400 K and 200-350 K, respectively. The space charge limited current measurements revealed the existence of a single discrete trapping level located at 0.44 eV. The dark electrical conductivity showed the existence of two energy levels of 0.32 eV and 0.60 eV being dominant above and below 300 K, respectively. The photoconductivity measurements reflected the existence of two other energy levels located at 0.28 eV and 0.19 eV at high and low temperatures, respectively. The photocurrent is observed to increase with increasing temperature up to a maximum temperature of 330 K. The illumination dependence of photoconductivity is found to exhibit supralinear recombination in all the studied temperature ranges. The change in recombination mechanism is attributed to exchange in the behavior of sensitizing and recombination centers. (C) 2006 Elsevier Ltd. All rights reserved.
