190 results
Search Results
Now showing 1 - 10 of 190
Article Citation - WoS: 19Citation - Scopus: 21Mean Instantaneous Performance of a System With Weighted Components That Have Arbitrarily Distributed Lifetimes(Elsevier Sci Ltd, 2013) Eryilmaz, SerkanThere are various systems consisting of components which may have different contribution to the performance of the system. Such systems can be modeled systems with weighted components. In this paper, we study the mean instantaneous performance of this type of systems after successive component failures. The mean instantaneous performance is a useful characteristic to take preventive action about the system. In particular, we obtain explicit expressions for the mean instantaneous performance of a system with weighted components that have arbitrarily distributed lifetimes. We illustrate the results when the lifetime distribution of components follow proportional hazard model. Some further results are also presented for the components having exponential lifetime distribution. (C) 2013 Elsevier Ltd. All rights reserved.Article Citation - WoS: 4Citation - Scopus: 4Growth and Optical Characterization of Sn0.6sb0.4< Layer Single Crystals for Optoelectronic Applications(Elsevier Sci Ltd, 2022) Bektas, T.; Terlemezoglu, M.; Surucu, O.; Isik, M.; Parlak, M.SnSe compound is an attractive semiconductor material due to its usage in photovoltaic applications. The sub-stitution of Sb in the SnSe compound presents a remarkable advantage especially in point of tuning optical characteristics. The present paper reports the structural and optical properties of Sn1-xSbxSe (x = 0.4) layered single crystals grown by the vertical Bridgman method. To the best of our knowledge, this work is the first investigation of the Sn0.6Sb0.4Se crystal grown with the vertical Bridgman technique. X-ray diffraction (XRD) pattern of the grown crystal indicated the well crystalline structure of the grown crystals. Lattice strain and interplanar spacing of the crystal structure were determined using the XRD pattern. Scanning electron micro-scope images allowed to the observation of the layer crystal structure. The layer crystalline structure shows 2D material properties and provides 2D applications. Optical properties were revealed by carrying out Raman, ellipsometry and transmission measurements. Raman modes, refractive index, extinction coefficient, and dielectric spectra, band gap energy of the crystal were presented throughout the paper. The obtained results indicated that Sn1-xSbxSe (x = 0.4) layer single crystals may be an alternative potential for photovoltaic and optoelectronic applications.Article Citation - WoS: 44Citation - Scopus: 54Preparation and Photocatalytic Activity of G-c3n4< Heterojunctions Under Solar Light Illumination(Elsevier Sci Ltd, 2020) Gundogmus, Pelin; Park, Jongee; Ozturk, AbdullahThe solar light sensitive g-C3N4/TiO2 heterojunction photocatalysts containing 20, 50, 80, and 90 wt% graphitic carbon nitride (g-C3N4) were prepared by growing Titania (TiO2) nanoparticles on the surfaces of g-C3N4 particles via one step hydrothermal process. The hydrothermal reactions were allowed to take place at 110 degrees C at autogenous pressure for 1 h. Raman spectroscopy analyses confirmed that an interface developed between the surfaces of TiO2 and g-C3N4 nanoparticles. The photocatalyst containing 80 wt% g-C3N4 was subsequently heat treated 1 h at temperatures between 350 and 500 degrees C to improve the photocatalytic efficiency. Structural and optical properties of the prepared g-C3N4/TiO2 heterojunction nanocomposites were compared with those of the pristine TiO2 and pristine g-C(3)N(4 )powders. Photocatalytic activity of all the nanocomposites and the pristine TiO2 andg-C3N4 powders were assessed by the Methylene Blue (MB) degradation test under solar light illumination. g-C3N4/TiO2 heterojunction photocatalysts exhibited better photocatalytic activity for the degradation of MB than both pristine TiO2 and g-C3N4. The photocatalytic efficiency of the g-C3N4/TiO2 heterojunction photocatalyst heat treated at 400 degrees C for 1 his 1.45 times better than that of the pristine TiO2 powder, 2.20 times better than that of the pristine g-C3N4 powder, and 1.24 times better than that of the commercially available TiO2 powder (Degussa P25). The improvement in photocatalytic efficiency was related to i) the generation of reactive oxidation species induced by photogenerated electrons, ii) the reduced recombination rate for electron-hole pairs, and iii) large specific surface area.Article Linear Two-Dimensional Consecutive K-Type Systems in Multi-State Case(Elsevier Sci Ltd, 2026) Yi, He; Balakrishnan, Narayanaswamy; Li, XiangIn the context of consecutive k-type systems, multi-state system models are only considered in the onedimensional case and not in the two-dimensional case due to the complexity involved. In this paper, we consider several linear two-dimensional consecutive k-type systems in the multi-state case for the first time, as generalization of consecutive k-out-of-n systems and l-consecutive-k-out-of-n systems without/with overlapping. These systems include multi-state linear connected-(k, r)-out-of-(m, n): G systems, multi-state linear connected-(k, r)-or-(r, k)-out-of-(m, n): G systems, multi-state linear 1-connected-(k, r)-out-of-(m, n): G systems without/with overlapping, and multi-state linear 1-connected-(k, r)-or-(r, k)-out-of-(m, n): G systems without/with overlapping. We then derive their reliability functions by using the finite Markov chain imbedding approach (FMCIA) in a new way. We also present several examples to illustrate all the results developed here.Article Citation - WoS: 39Citation - Scopus: 48Understanding Key Skills for Information Security Managers(Elsevier Sci Ltd, 2018) Haqaf, Husam; Koyuncu, MuratInformation security management is a necessity for all institutions and enterprises that regard company information as valuable assets. Developing, auditing and managing information security depends upon professional expertise in order to achieve the desired information security governance. This research seeks the key skills required for the position of information security management as well as the methods to develop these skills through professional training programs. The study adopts the Delphi method which requires building a list of items through a literature survey and involves experts with certain expertise to modify the list until a consensus on less than 20% of the items is reached. Through completing three rounds of the Delphi technique - data collection, relevance voting and ranking sixteen skills are shortlisted as the key skills. In the final list, the majority belong to core information security skills, and the top two skills belong to project/process management skills and risk management skills, indicating the importance of these skills for the information security manager role. In addition, a series of related professional training programs and certifications are surveyed, the outcome of which highlights a number of most comprehensive and appropriate programs to develop these determined skills.Correction Characterization of Lead Glazed Potteries From Smyrna (izmir/Turkey) Using Multiple Analytical Techniques; Part I: Glaze and Engobe (vol 40, Pg 2143, 2014)(Elsevier Sci Ltd, 2014) Ozcatal, M.; Yaygingol, M.; Issi, A.; Kara, A.; Turan, S.; Okyar, F.; Minceva-Sukarova, B.[No Abstract Available]Article Knee Hyperextension in Chronic Stroke: Associated Biomechanical and Neuromuscular Factors(Elsevier Sci Ltd, 2025) Korkusuz, Sueleyman; Korkusuz, Busra Seckinogullari; Ozgoren, Nihat; Aritan, Serdar; Ceren, Ali Naim; Topcuoglu, Mehmet Akif; Balkan, Ayla FilBackground: This study aimed to determine the gait phase in which knee hyperextension occurs in stroke patients and to investigate the factors associated with knee hyperextension. Methods: This study included 30 stroke patients aged between 40 and 70 years with maximum knee hyperextension during the stance phase of gait. Muscle strength was evaluated with manual muscle test, and muscle tone was assessed with the Modified Ashworth Scale. Kinematic evaluation of the patients was made using the motion analysis system. Additionally, categorisation was made according to the stance phase of gait, where knee hyperextension was at its highest. Findings: A weak relationship was found between maximum knee hyperextension angle and gastrocnemius spasticity, a moderate relationship between knee flexor muscle strength, and a moderate relationship between ankle dorsiflexor muscle strength. In addition, a weak relationship was found between the maximum knee hyperextension and pelvic retraction angles. According to this clustering, it was observed that 66.67 % of the participants (20 people) showed maximum knee hyperextension in the single support phase. It was observed that the participants who had maximum knee hyperextension, especially after the mid-stance phase, had higher mean gastrocnemius spasticity. It was also observed that participants in Cluster 4, with a greater amount of maximum knee hyperextension, had the worst clinical parameters. Interpretation: Our study observed that the degree of maximum knee hyperextension was related to knee flexor and ankle dorsiflexor muscle strengths, gastrocnemius spasticity and pelvic retraction. As clinical parameters worsened, maximum knee hyperextension was thought to occur late in the stance phase. Clinical Trial code: NCT05679700Article A New Method To Determine the Continuous Refractive Index of an Absorbing Film by Generalized Stockwell Transform(Elsevier Sci Ltd, 2023) Coskun, Emre; Emir, Cansu; Selamet, Semanur; Parlak, Mehmet; Ozder, SerhatGeneralized Stockwell Transform (GST) was adapted to analyze a transmittance signal to continuously determine the refractive index and extinction coefficient. The process is built by analyzing oscillation frequencies of the transmission signal where oscillations exist. The simulation studies clearly show the advantage of the locally referenced phase property of the presented method. The validity of the method was checked for a CdS thin film. The results determined by the GST method are consistent with the results determined by envelope and other signal analyzing methods, and the literature. The noise and relative error analysis of the method was also discussed.Article Citation - WoS: 19Citation - Scopus: 21Plateau Honing of a Diesel Engine Cylinder With Special Topography and Reasonable Machining Time(Elsevier Sci Ltd, 2020) Sadizade, Babak; Araee, Alireza; Oliaei, Samad Nadimi Bavil; Farshi, Vahid RezaeizadDeep valleys and flattened peaks are essential characteristics of the finished cylinder bore surface, which is known as the plateau surface. Generally, a honing process is done in three steps to achieve a plateau surface, which is costly and time-consuming and acts as a bottleneck for cylinder block machining line. The real challenge is to select optimum levels of honing process parameters to achieve desired surface characteristics with minimum machining time. The aim of this study is to examine the influence of the input parameters of the honing process on the surface texture of diesel engine cylinder bore. The Rk family parameters are used for surface roughness evaluation and the honing crosshatch angle, in accordance with engine design requirements, which was fixed for all experiments. Optimization by means of the desirability function technique allowed determining most appropriate conditions to desirable roughness (surface quality) and/or minimize machining time (productivity). Based on the findings of this study the conventional three-stage honing process has been replaced by the two-stage process. Using the proposed two-stage honing process the intended plateau surface in cylinder bores are achieved and a remarkable reduction in the honing process time is obtained. Consequently, the process efficiency is improved significantly.Article Citation - WoS: 13Citation - Scopus: 13Crustal Thickness in the Black Sea and Surrounding Region, Estimated From the Gravity Data(Elsevier Sci Ltd, 2021) Bilim, Funda; Aydemir, Attila; Ates, Abdullah; Dolmaz, M. Nuri; Kosaroglu, Sinan; Erbek, EzgiIn this research, the crustal thickness (Moho depth) variations in the Black Sea and surrounding region were calculated from the regional gravity anomaly data using an empirical equation. The data were obtained from the open source of Bureau Gravimetrique International (BGI) in digitized form. The gravity anomaly values are changing from 80 mGal in the onshore Black Sea region in Turkey to 260 mGal in the deeper parts of the sea. Maximum gravity anomaly indicates a consistent pattern in the offshore Black Sea and anomaly pattern follows the shape of the shoreline. The pattern is consistent with the deeper parts in the marine area and the eastern anomaly extends into the Russian territory between NW of Georgia and SE of the Crimean Peninsula. The crustal thickness map indicates almost the same trends. In this map, the minimum crustal thickness is about 10 km around the mid of the Shatsky Ridge, close to the coastal regions of SE Russia and the second thinnest (12 km) place is located around the Western Black Sea Basin. The maximum thicknesses are represented with the 34-36 km contours in the onshore Eastern Black Sea region and east of Anatolia. On the other hand, the maximum crustal thickness to the north can reach up to 28 km around the Sea of Azov and to the east. The thickness variations are generally related with the main tectonic trends in this region. The Analytic Signal (AS) and maxima points of the horizontal gradients (maxspots) maps constructed from the gravity anomalies are also prepared in this research to see if these anomaly trends follow the tectonic lines. The regions of maximum and minimum crustal thicknesses are well-consistent with the AS anomalies and boundaries of the bifocal thin crustal sections coinciding with the Eastern and Western Black Sea basinal parts are surrounded with the maxspots. The northern thick crustal region around the southern margin of the Indolo-Kuban Basin is also surrounded by the maxspots. It is possible to claim that the maxspots map from the horizontal gradient of Bouguer anomalies reflects the boundaries of the main tectonic units in the Black Sea Region. Particularly, southern boundary of the Scythian Platform, southern boundary of the Shatsky Ridge and Great Caucasus thrust are distinctive and easy to follow in the maxspots map.
