Filters

2016 - 20192
Reset filters

Settings

Has files: falseSubject: applications

Search Results

Now showing 1 - 2 of 2
  • Thumbnail Image
    Conference Object
    Predicting the Topology of the Bending Corner in Bending of Ultra High Strength Steels Through Finite Element Analysis
    (Tanger Ltd, 2019) Cetin, Baris; Billur, Eren; Baranoglu, Besim; Toptas, Ugur; Alic, Ozgur; Manufacturing Engineering; Automotive Engineering
    In bending of plates, unlike the case of sheet metal forming, a 3-D stress state is valid. Moreover, apart from the some very specific cases, the plane strain assumption is not appropriate either. Therefore; bending of thick ultra-high strength steel (UHSS) plates is a deformation process where 3-D stress and strain states exist in general. This study basically focuses on the prediction of the bending corner topology with non-linear finite element analysis method, since the laser-cut edges of the UHSS are particularly prone to edge cracking during bending operation. Within the scope of this study, an experimental set-up is designed which consists of bending tools and a servo mechanical press. The samples were bent by means of this set-up in an air-bending operation up to 90 degrees. This experimental work was followed by optical scanning measurements. And finally, the FEA results and the scanning data were compared in 3-D space. The results showed good correlation. As a future study, the 3-D strain field of the bending corner will be tried to be measured by a professional digital image correlation (DIC) system which could probably give more precise data when combined with the data from FEA.
  • Thumbnail Image
    Article
    Citation - WoS: 50
    Citation - Scopus: 51
    Elemental Sulfur-Based Polymeric Materials: Synthesis and Characterization
    (Wiley-blackwell, 2016) Salman, Mohamed Khalifa; Karabay, Baris; Karabay, Lutfiye Canan; Cihaner, Atilla
    New elemental sulfur-based polymeric materials called poly(sulfur-random-divinylbenzene) [poly(S-r-DVB)] were synthesized by ring opening polymerization via inverse vulcanization technique in the presence of a mixture of o-, m-, and p-diviniylbenzene (DVB) as a cross-linker. A clear yellow/orange colored liquid was obtained from the elemental sulfur melted at 160 degrees C and then by adding various amounts of DVB to this liquid directly via a syringe at 200 degrees C viscous reddish brown polymeric materials were obtained. The copolymers are soluble in common solvents like tetrahydrofuran, dichloromethane, and chloroform, and they can be coated on any surface as a thin film by a spray coating technique. The characterization of the materials was performed by using nuclear magnetic resonance, fourier transform infrared, and Raman spectroscopies. The morphological properties were monitored via scanning electron microscope technique. Thermal analysis showed that an increase in the amount of DVB in the copolymers resulted in an increase in the thermal decomposition temperature. On the other hand, poly(S-r-DVB) copolymers exhibited good percent transmittance as 50% T between 1500 and 13,000 nm in electromagnetic radiation spectrum, which makes them good candidates to be amenable use in military and surveillance cameras. (c) 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016, 133, 43655.