2 results
Search Results
Now showing 1 - 2 of 2
Article Citation - WoS: 44Citation - Scopus: 43Silver-Loaded Tio2 Powders Prepared Through Mechanical Ball Milling(Elsevier Sci Ltd, 2013) Aysin, Basak; Ozturk, Abdullah; Park, JongeeSilver (Ag) was loaded on TiO2 powders through mechanical ball milling. Ag-loading was accomplished by adding 4.6, 9.2, and 13.8 ml of AgNO3 solution to the TiO2 powders during the milling process. The resulting powder was characterized by XRD, XPS, SEM, and EDS. The photocatalytic activity of the silver-loaded powder was evaluated in terms of the degradation of methyl orange (MO) solution under ultraviolet (UV) illumination. XRD patterns were refined using the Rietveld analysis to determine the lattice parameters. XRD analysis suggested that Ag was loaded on TiO2 powders in the form of AgO. X-ray photoelectron spectroscopy and Rietveld analysis revealed that silver did not dope into the crystal structure of TiO2. SEM investigations confirmed that ball milling caused a decrease in the average particle size of the powders. Silver-loading improved the photocatalytic activity of the TiO2 powders. The TiO2 powder ball milled without Ag-loading degraded 46% of the MO solution whereas the ball milled with 13.8 ml AgNO3 solution degraded 96% of the MO solution under 1 h UV irradiation. Moreover, TiO2 powders gained antibacterial property after Ag-loading. (c) 2013 Elsevier Ltd and Techna Group S.r.l. All rights reserved.Article Citation - WoS: 148Citation - Scopus: 152Carbon Supported Trimetallic Pdniag Nanoparticles as Highly Active, Selective and Reusable Catalyst in the Formic Acid Decomposition(Elsevier Science Bv, 2014) Yurderi, Mehmet; Bulut, Ahmet; Zahmakiran, Mehmet; Kaya, MuratTrimetallic PdNiAg nanoparticles supported on activated carbon were simply and reproducibly prepared by wet-impregnation followed by simultaneous reduction method without using any stabilizer at room temperature. The characterization of the resulting material was done by the combination of complimentary techniques and the sum of their results shows that the formation of well-dispersed 5.6 +/- 2.2 nm PdNiAg nanoparticles in alloy form on the surface of activated carbon. These carbon supported PdNiAg nanoparticles were employed as heterogeneous catalyst in the catalytic decomposition of formic acid, which has great potential as a safe and convenient hydrogen carrier for fuel cells, under mild conditions. It was found that PdNiAg/C can catalyze the dehydrogenation of formic acid with high selectivity (similar to 100%) and activity (TOF = 85 h(-1)) at 50 degrees C. More importantly, the exceptional stability of PdNiAg nanoparticles against to agglomeration, leaching and CO poisoning make PdNiAg/C reusable catalyst in the formic acid dehydrogenation. PdNiAg/C catalyst retains almost its inherent activity (>94%) even at 5th reuse in the dehydrogenation of formic acid with high selectivity (similar to 100%) at complete conversion. The work reported here also includes the compilation of kinetic data for PdNiAg/C catalyzed dehydrogenation of formic acid depending on catalyst [PdNiAg], substrate [HCOOH], promoter [HCOONa] concentrations and temperature to determine the rate expression and the activation parameters (Ea, Delta H-#, and Delta S-#) of the catalytic reaction. (C) 2014 Elsevier B.V. All rights reserved.
