259 results
Search Results
Now showing 1 - 10 of 259
Article Citation - WoS: 45Citation - Scopus: 49Recrystallization and Grain Growth Kinetics of In718 Manufactured by Laser Powder Bed Fusion(Elsevier, 2022) Dogu, Merve Nur; Davut, Kemal; Obeidi, Muhannad Ahmed; Yalcin, Mustafa Alp; Gu, Hengfeng; Low, Thaddeus Song En; Brabazon, DermotThe recrystallization and grain growth behaviour of IN718 alloy additively manufactured by laser powder bed fusion (L-PBF) is presented herein. The effects of three different temperatures (1050, 1150 and 1250 degrees C) and holding times (15, 45 and 90 min) were investigated. The texture evolution of the samples was recorded via electron backscatter diffraction (EBSD). The as-built sample is composed of bowl-shaped melt pools, a chessboard-like grain pattern and has a cube texture {100}<001>. Recrystallized grains were observed in the samples treated at 1150 degrees C for 15 min, as well as the samples treated for longer periods and at higher temperatures. Recrystallization was observed to start from high dislocation density regions, including the overlapping melt pools and the borders of the chessboard-like pattern. The initial cube texture transforms into a first-generation cube-twin texture {122}<212> via a twinning-assisted recrystallization mechanism. Then, those recrystallization nuclei sweep through the high defect density matrix; during which almost no new twins are formed. The samples treated at 1250 degrees C are almost completely recrystallized, which forms a weaker cube texture and a stronger P-orientation {011}<112>. However, the growth of recrystallized grains is very limited due to the presence of non-coherent precipitates. (C) 2022 The Author(s). Published by Elsevier B.V.Article Citation - WoS: 22Citation - Scopus: 25Effect of Solution Heat Treatment on the Microstructure and Crystallographic Texture of In939 Fabricated by Powder Bed Fusion-Laser Beam(Elsevier, 2023) Dogu, Merve Nur; Ozer, Seren; Yalcin, Mustafa Alp; Davut, Kemal; Bilgin, Guney Mert; Obeidi, Muhannad Ahmed; Brabazon, DermotThe effect of various solution heat treatment temperatures (i.e., 1120, 1160, 1200 and 1240 & DEG;C) on the microstructure, grain morphology and crystallographic texture of IN939 fabricated by powder bed fusion-laser beam (PBF-LB) was investigated. Microstructural analyses showed that the high-temperature gradient and rapid solidification of the PBF-LB processing caused different resulting microstructures compared to conventionally pro-duced counterparts. The melt pool morphologies and laser scanning paths were examined in the as-fabricated samples in the XZ-and XY-planes, respectively. After the application of solution heat treatment at 1120 & DEG;C, the as-fabricated PBF-LB initial microstructure was still apparent. For solution heat treatments of 1200 & DEG;C and above, the melt pool and scanning path morphologies disappeared and converted into a mixture of columnar grains in the XZ-plane and equiaxed grains in the XY-plane. On the other hand, large equiaxed grains were observed when the samples were solutionized at 1240 & DEG;C. Additionally, g' phase precipitated within the matrix after all solution heat treatment conditions, which led to increase in the microhardness values. According to electron backscatter diffraction (EBSD) analyses, both as-fabricated and solution heat-treated samples had intense texture with {001} plane normal parallel to the building direction. The first recrystallized grains began to appear when the samples were subjected to the solution heat treatment at 1160 & DEG;C and the fraction of the recrystallized grains increased with increasing temperature, as supported by kernel average misorientation (KAM) and grain spread orientation (GOS) analyses.& COPY; 2023 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).Article Citation - WoS: 5Citation - Scopus: 6Clinic-Oriented Injectable Smart Material for the Treatment of Diabetic Wounds: Coordinating the Release of Gm-Csf and Vegf(Elsevier, 2024) Kinali, Hurmet; Kalaycioglu, Gokce Dicle; Boyacioglu, Ozge; Korkusuz, Petek; Aydogan, Nihal; Vargel, IbrahimChronic wounds are often caused by diabetes and present a challenging clinical problem due to vascular problems leading to ischemia. This inhibits proper wound healing by delaying inflammatory responses and angiogenesis. To address this problem, we have developed injectable particle-loaded hydrogels which sequentially release Granulocyte-macrophage- colony-stimulating-factor (GM-CSF) and Vascular endothelial growth factor (VEGF) encapsulated in polycaprolactone-lecithin-geleol mono-diglyceride hybrid particles. GM-CSF promotes inflammation, while VEGF facilitates angiogenesis. The hybrid particles (200 -1000 nm) designed within the scope of the study can encapsulate the model proteins Bovine Serum Albumin 65 +/- 5 % and Lysozyme 77 +/- 10 % and can release stably for 21 days. In vivo tests and histological findings revealed that in the hydrogels containing GM-CSF/VEGF-loaded hybrid particles, wound depth decreased, inflammation phase increased, and fibrotic scar tissue decreased, while mature granulation tissue was formed on day 10. These findings confirm that the hybrid particles first initiate the inflammation phase by delivering GM-CSF, followed by VEGF, increasing the number of vascularization and thus increasing the healing rate of wounds. We emphasize the importance of multi-component and sequential release in wound healing and propose a unifying therapeutic strategy to sequentially deliver ligands targeting wound healing stages, which is very important in the treatment of the diabetic wounds.Article Citation - WoS: 25Citation - Scopus: 25A Model for the Prediction of Thermal Runaway in Lithium-Ion Batteries(Elsevier, 2024) Azuaje-Berbeci, Bernardo J.; Ertan, H. BulentThe increasing popularity of electric vehicles is driving research into lithium -ion batteries (LIBs). Thermal runaway (TR) in LIBs is a serious concern for the safe operation of these high-energy-density batteries that is yet to be overcome. A reliable model is needed to predict voltage variation, heat generation, temperature rise, and the process leading to TR of a LIB battery under its operating conditions (charging-discharging). Such a model can be used to design battery packs more resilient to thermal runaway or assess how a battery pack would perform under hazardous conditions. Furthermore, it can be used for generating a warning signal if there is a possibility of the battery going towards TR. This paper presents an approach to solving this problem, which is not currently well addressed in the literature. The approach adopted in this paper is based on a numerical analysis of a multilayered electrochemical-thermal model of LIB. Tuning the parameters of a LIB for accurate results from this numerical model is presented, as well as the details of the approach in the paper. Experiments are performed under several LIBs, and their voltage and surface temperature variations are measured under various operating conditions, including thermal runaway. The results of the experiments are compared with the predictions of the numerical simulations. An excellent agreement is observed with the experimental results, proving the accuracy of the proposed approach. This approach can be configured to give results in a few minutes. The paper also discusses how the developed approach can be used to create a TR warning during operating conditions or to change the mode of operation of a LIB before a hazard occurs.Article Citation - WoS: 5Citation - Scopus: 7Design of Novel Tellurium and Selenium Containing Semiconducting Polymers Using Quantum Mechanical Tools(Elsevier, 2017) Kaya, Birnur; Kayi, HakanStructural, optical and electronic properties of the two novel donor-acceptor-donor type conjugated polymers based on 4,7-di(selenophen-2-yl)benzo[c][1,2,5]selenadiazole (SeSeSe) and 4,7-di(tellurophen-2-yl)benzo[c][1,2,5]telluradiazole (TeTeTe) are investigated by means of quantum chemical calculations utilizing conventional and long-range corrected hybrid functionals. The lowest energy structures of the SeSeSe and TeTeTe monomers and oligomers are revealed through conformational analysis, while their electronic properties are obtained from density functional theory (DFT) molecular orbital calculations and optical properties are obtained from the time dependent DFT (TD-DFT) calculations for UV-vis absorption spectra. Electronic band gaps that directly affect the semiconducting properties of these novel polymers are calculated by using linear regression analysis of DFT data, and also periodic boundary conditions calculations (PBC-DFT). Our results indicate that SeSeSe and TeTeTe polymers have considerably lower band gap values than that of their furan-, thiophene-, benzooxadiazole- and benzothiadiazole-based analogs. The novel SeSeSe and TeTeTe polymers with improved optical and electronic properties may have an important role in the near future, especially for the optoelectronic and photovoltaic applications. (C) 2016 Elsevier B.V. All rights reserved.Article Citation - WoS: 10Citation - Scopus: 11Low Temperature Thermoluminescence of Gd2o3< Nanoparticles Using Various Heating Rate and tmax< - texc< Methods(Elsevier, 2019) Delice, Serdar; Isik, Mehmet; Gasanly, Nizami M.Thermoluminescence (FL) measurements for Gd2O3 nanoparticles were carried out for various heating rates between 0.3 and 0.8 K/s at low temperatures (10-280 K). TL spectrum exhibited two observable and one faint peaks in the temperature region of 10-100 K, and four peaks in the temperature region of 160-280 K. Heating rate analysis was achieved to understand the behaviors of trap levels. It was seen that the peak maximum temperatures and TL intensities of all peaks increase with increasing heating rate. This behavior was ascribed to anomalous heating rate effect. T-max - T(exc )analysis was accomplished for TL, peaks at relatively higher temperature region to reveal the related traps depths. T-max - T-exc plot presented a staircase structure indicating that the TL glow curve is composed of well separated glow peaks. Mean activation energies of trapping centers corresponding to these separated peaks were found as 0.43, 0.50, 0.58 and 0.80 eV.Article Citation - WoS: 30Citation - Scopus: 39A Transformative Solution for Construction Safety: Blockchain-Based System for Accident Information Management(Elsevier, 2023) Ahmadisheykhsarmast, Salar; Aminbakhsh, Saman; Sonmez, Rifat; Uysal, FurkanEffective management of accident information is a crucial component of safety management within the construction industry, as it reflects the safety performance of the company and allows them to identify the root causes of accidents and prevent similar accidents in the future. However, existing safety information systems provide self-owned, isolated, and centralized environments and fail to present a secure, transparent, and trustworthy platform for monitoring and management of accident information. To address these issues, this paper presents a novel decentralized blockchain-based system for accident/incident information management of construction projects. The proposed system leverages the benefits and advantages of blockchain, smart contracts, and decentralized IPFS storage to address the security transparency, tampering, and trustworthiness issues of the conventional approaches. The proposed system is simulated by using real-world construction accident data to demonstrate how blockchain technology can provide a novel solution to assure security, transparency, authenticity, availability, and immutability of the accident/incident data for improving safety management.Article Citation - WoS: 21Citation - Scopus: 20Nonlinear Optical Absorption Characteristics of Pbmoo4 Single Crystal for Optical Limiter Applications(Elsevier, 2022) Pepe, Yasemin; Isik, Mehmet; Karatay, Ahmet; Gasanly, Nizami; Elmali, AyhanMolybdate materials take great interest due to their photocatalytic and optoelectronic applications. In this report, PbMoO4 single crystal, one of the member of molybdate materials, is grown by Czochralski technique and the change of nonlinear absorption characteristic depending on the input intensity was reported. Linear absorption analysis revealed the band gap energy and Urbach energy as to be 3.12 and 0.52 eV, respectively. Nonlinear absorption characteristics of the PbMoO4 single crystal was examined with the open aperture (OA) Z-scan experiments at 532 nm excitation wavelength under various input intensities. Fitting results of the OA Z-scan experiments indicated that PbMoO4 single crystal has nonlinear absorption (NA) behavior, and NA coefficient (beta(eff)) increased from 7.11 x 10(-8) to 1.96 x 10(-7) m/W with increasing input intensity. This observation was associated with the increase of the contribution of the free carrier absorption to the NA with the generation of more excited electrons with increasing input intensity. At the 532 nm excitation wavelength (2.32 eV), the dominant mechanisms were revealed as one photon and free carrier absorptions. The optical limiting threshold of the PbMoO4 single crystal was obtained to be 4.91 mJ/cm(2). The reported results indicated that PbMoO4 single crystal can be a good optical limiter in the visible wavelength region due to its effective NA behavior.Article Citation - WoS: 18Citation - Scopus: 18Quality Changes of Hazelnut Kernels Subjected To Different Cold Plasmas and Gamma Irradiation Treatments(Elsevier, 2019) Onal-Ulusoy, Baran; Sen, Yasin; Mutlu, MehmetIn this study, physicochemical parameters of hazelnuts after atmospheric-pressure (AP:air, 3000 L/h, 655 W, 25 kHz, 1.7 min) and low-pressure (LP:air, 25 Pa, 100 W, 13.56 MHz, 30 min) cold plasmas, and gamma irradiation (GMI:10 kGy, 10 min) treatments, and untreated and treated hazelnuts after accelerated storage for 30 days(60 degrees C) were investigated. All treatments significantly reduced moisture (26-47%), a(w) (16-48%), oil (13-15%), soluble phenolic content (SPC; 26-36%) and total tocopherols (TT; 8-38%) compared to untreated hazelnut (Control-1) while no significant changes determined between treatments and Control-1 in terms of L*a*b*, protein, total sugars (TS) and total phenolic compounds. However, TS of all treatments after storage were significantly increased (3.2-33%) while aw (7-27%) and TT (13-31%) of all treatments were significantly decreased compared to both Control-2 and before storage (p < 0.05). Among treatments, cold plasmas showed great potential for conservation of most tested parameters.Article Citation - WoS: 46Citation - Scopus: 51Multiscale modeling of tempering of AISI H13 hot-work tool steel - Part 1: Prediction of microstructure evolution and coupling with mechanical properties(Elsevier, 2016) Eser, A.; Broeckmann, C.; Simsir, C.In the first part of this two part study, the mechanical properties necessary for the simulation of tempering of an AISI H13 (DIN 1.2344, X40CrMoV5-1) tool steel was derived using physically based precipitation simulations and microstructure-property relationships. For this purpose, the precipitation of fine carbides were simulated using a thermo-kinetic software which allows prediction of the evolution of precipitation/dissolution reactions and the particle sizes. Then, those microstructural findings were coupled with physically based microstructure-property models to predict the yield stress, flow curve and creep properties. The predicted mechanical properties were verified with corresponding experiments and a good agreement was found. In the second part of this study, those properties were coupled with a Finite Element (FE) model in order to predict the relaxation of internal stresses and the evolution of deformations at the macroscopic scale. (C) 2015 Elsevier B.V. All rights reserved.
