77 results
Search Results
Now showing 1 - 10 of 77
Article Citation - WoS: 17Citation - Scopus: 17Productivity and Growth in an Unstable Emerging Market Economy: the Case of Turkey, 1960-2004(Routledge Journals, Taylor & Francis Ltd, 2009) Ismihan, Mustafa; Metin-Ozcan, KivilcimThis paper explores sources of growth in the Turkish economy by performing growth accounting exercises over the 1960-2004 period and relevant subperiods. It also analyzes the role of a number of important policy-related factors, such as infrastructure investment, macroeconomic instability, and imports, on total factor productivity (TFP) by performing cointegration and impulse response analyses. The results suggest that both TFP and capital accumulation were crucial sources of growth during the sample period. Nevertheless, TFP growth displayed enormous variation from 1960 to 2004. The descriptive and empirical evidence suggests that TFP is positively affected by imports and public infrastructure investment and negatively affected by macroeconomic instability.Article Citation - WoS: 25Citation - Scopus: 27Robust stability of 2-D digital filters employing saturation(Ieee-inst Electrical Electronics Engineers inc, 2005) Singh, VA computationally tractable, i.e., linear matrix inequality (LMI)-based criterion for the global asymptotic stability of uncertain two-dimensional digital filters described by the Fornasini-Marchesini second local state-space model with saturation overflow arithmetic is presented. The criterion is compared with an earlier LMI-based criterion.Article Citation - WoS: 8Citation - Scopus: 15Identification of Linear Handling Models for Road Vehicles(Taylor & Francis Ltd, 2008) Arikan, K. B.; Unlusoy, Y. S.; Korkmaz, I.; Celebi, A. O.This study reports the identification of linear handling models for road vehicles starting from structural identifiability analysis, continuing with the experiments to acquire data on a vehicle equipped with a sensor set and data acquisition system, and ending with the estimation of parameters using the collected data. The model structure originates from the well-known linear bicycle model that is frequently used in handling analysis of road vehicles. Physical parameters of the bicycle model structure are selected as the unknown parameter set that is to be identified. Global identifiability of the model structure is analysed, in detail, and concluded according to various available sensor sets. Physical parameters of the bicycle model structure are estimated using prediction error estimation method. Genetic algorithms are used in the optimisation phase of the identification algorithm to overcome the difficulty in the selection of initial values for parameter estimates. Validation analysis of the identified model is also presented. The identified model is shown to track the system response successfully.Article Citation - WoS: 19Citation - Scopus: 23Effect of People Moving Near Short-Range Indoor Propagation Links at 2.45 Ghz(Korean inst Communications Sciences (k I C S), 2006) Kara, Ali; Bertoni, Henry L.Measurement results are presented for the effects of people moving near and across short-range indoor propagation links at 2.45 GHz (ISM band). Excess loss due to scattering and blockage by human bodies in the vicinity of one terminal were measured for different radio links in an office environment. Statistics on fades due to human body motion are given. Polarization coupling (depolarization) for various radio links was measured, and correlation of polarization components is discussed as a basis for using polarization diversity reception in short-range indoor systems.Article Citation - WoS: 9Citation - Scopus: 9The Approximation of Logarithmic Function by q-bernstein Polynomials in the Case q > 1(Springer, 2007) Ostrovska, SofiyaSince in the case q > 1, q-Bernstein polynomials are not positive linear operators on C[ 0, 1], the study of their approximation properties is essentially more difficult than that for 0 < q < 1. Despite the intensive research conducted in the area lately, the problem of describing the class of functions in C[ 0, 1] uniformly approximated by their q-Bernstein polynomials ( q > 1) remains open. It is known that the approximation occurs for functions admitting an analytic continuation into a disc {z : | z| < R}, R > 1. For functions without such an assumption, no general results on approximation are available. In this paper, it is shown that the function f ( x) = ln( x + a), a > 0, is uniformly approximated by its q-Bernstein polynomials ( q > 1) on the interval [ 0, 1] if and only if a >= 1.Article Citation - WoS: 20Citation - Scopus: 20The Stress Response of Partially Plastic Rotating Fgm Hollow Shafts: Analytical Treatment for Axially Constrained Ends(Taylor & Francis inc, 2006) Eraslan, Ahmet N.; Akis, Tolgaanalytical solutions to estimating the elastoplastic response of rotating functionally graded (FGM) hollow shafts with fixed ends are presented. The modulus of elasticity, as well as the uniaxial yield limit of the shaft material, are assumed to vary nonlinearly in the radial direction. The plastic model is based on Tresca's yield criterion, its associated flow rule, and ideal plastic material behaviour. Elastic, partially plastic, fully plastic, and residual stress states are investigated. It is shown that the elastoplastic stress response of a rotating FGM hollow shaft is affected significantly by the nonhomogeneity of the material. Unlike the case of a homogeneous hollow shaft, plastic deformation may commence at the inner surface, at the outer surface, or simultaneously at both surfaces. Accordingly, each case requires different mathematical treatment to arrive at its partially plastic solution. It is also shown that, by taking a numerical limit, the complete FGM solution presented herein converge to the solution of a homogeneous rotating shaft.Article Citation - WoS: 4Citation - Scopus: 4Template-free microsphere and hollow sphere formation of polymethylanilines(Wiley, 2009) Icli, Merve; Onal, Ahmet M.; Cihaner, AtillaBACKGROUND: Microsphere and/or hollow sphere formation of methyl-substituted polyaniline derivatives was investigated via chemical polymerization where different sets of conditions were examined. It was found that a variety of parameters (e.g. types and concentrations of monomer and oxidant, polymerization time, solvent with and without acid) have a crucial influence on the morphology of the resulting polyaniline derivatives. RESULTS: Structures with desired morphologies (with or without microspheres and hollow spheres) may be obtained in a controlled manner by changing the parameters. Moreover, the electrochemical and optical properties of the polymers in the presence of acid and/or base were investigated via cyclic voltammetry and UV-visible and electron spin resonance spectroscopic techniques. It is noteworthy that the morphologies of microspheres and/or hollow spheres remained unchanged after repeated acid and base treatments. CONCLUSION: Micro/hollow spherical structures were successfully prepared via chemical polymerization of various substituted anilines by using ammonium persulfate as oxidant. It was found that the type of oxidant and monomers along with the polymerization time are quite important factors for the formation of micro/hollow spheres. Furthermore, hydrogen bond formation does not play any crucial role for the formation of these spheres. Chemically and electrochemically doped/dedoped states of microspheres and/or hollow spheres are very sensitive, and give rapid response towards vapours of HCl and NH3, which makes them amenable for use in sensors. (c) 2009 Society of Chemical IndustryArticle Citation - WoS: 1Citation - Scopus: 3A robust on-line learning algorithm for intelligent control systems(John Wiley & Sons Ltd, 2003) Efe, MÖ; Kaynak, O; Wilamowski, BM; Yu, XHThis paper describes a novel error extraction approach for exploiting the strength of Levenberg-Marquardt (LM) optimization technique in intelligent control systems: Since the target value of the control signal is unknown, tuning of the controller parameters becomes a tedious task if the knowledge about the system and the environment is limited. The suggested methodology utilizes the sliding model control (SMC) technique. The error extraction scheme postulates the form of error on the applied control signal using the discrepancy from the prescribed reaching dynamics. The devised approach has been tested on the non-linear Duffing oscillator, which has been forced to follow a periodic orbit radically different from the natural one. The results obtained through a series of simulations have confirmed the high precision and robustness advantages without knowing the analytical details of the system under investigation. The issues of observation noise and the stability in the parametric space have approximately been addressed from the point of SMC perspective. Copyright (C) 2003 John Wiley Sons, Ltd.Article Citation - WoS: 18Citation - Scopus: 18Growth, Electrical and Structural Characterization of Β-Gase Thin Films(Springer, 2003) Parlak, M; Qasrawi, AF; Erçelebi, ÇGaSe thin films were deposited onto the glass substrates kept at 200degrees and 300degreesC by the thermal evaporation of GaSe crystals under the pressure of 10(-5) Torr. X-ray analysis of the films revealed that films grown at 200. C are amorphous in nature while the films grown at 300degreesC are polycrystalline beta-GaSe. The temperature dependent electrical conductivity measurements in the region of 320-100 K for the films grown at 300degreesC showed that the transport mechanisms are the thermionic emission of charged carriers and the variable range hopping above and below 180 K, respectively. Space charge limited current (SCLC) studies have also been performed on these films through the current-voltage measurements at different temperatures and a dominant hole trap at 0.233 eV from the top of the valance band with a trap density of similar to1.6 x 10(11) cm(-3) is identified. (C) 2003 Kluwer Academic Publishers.Article Citation - WoS: 1Citation - Scopus: 1Experimental Determination of Resistance Characteristics of Support Details Used in Prestressed Concrete Bridge Girders(Asce-amer Soc Civil Engineers, 2009) Baran, Eray; Rohne, Ryan; French, Catherine E.; Schultz, Arturo E.Static load tests were performed on support details used at the ends of prestressed concrete pedestrian bridge girders to determine the resistance characteristics of girder supports in the direction perpendicular to the longitudinal axis of the girders. The specimens tested represent support details that have also been widely used in prestressed concrete highway bridges in Minnesota and in other states. Two specimens, one representing the free-end detail and one representing the restrained-end detail were subjected to a combination of vertical and lateral loads. The applied loading was intended to simulate the loading conditions to which the girder ends would be subjected in the event of an over-height vehicle collision with the bridge. The tests revealed two types of lateral load resisting mechanisms depending on the type of support detail. The specimen with the free-end detail resisted the lateral loading through sliding friction between the components of the support assembly. Deformation of this specimen was a combination of shear deformation of the bearing pad and sliding of various support components. The restrained-end detail exhibited larger lateral load capacity than the free-end detail due to the resistance provided by the anchor rods that were intended to prevent the lateral movement of the girder ends. Failure of the specimen with restrained-end detail was due to the concrete breakout and bending of the anchor rods.
