Filters

2020 - 20212
Reset filters

Settings

Author: Yilmaz, Okan DenizWoS Q: Q1

Search Results

Now showing 1 - 2 of 2
  • Thumbnail Image
    Article
    Citation - WoS: 12
    Citation - Scopus: 11
    Effect of Constitutive Material Model on the Finite Element Simulation of Shear Localization Onset
    (Elsevier, 2020) Yilmaz, Okan Deniz; Oliaei, Samad Nadimi Bavil
    One of the most challenging problems in the field of machining is to determine the onset of shear localization. The consequences of the emergence of shear localized chips are fluctuations in the machining forces, tool wear, deterioration of the surface quality and out-of-tolerance machined components. Several constitutive material models are developed for the simulation of shear localization during machining, especially for Ti6Al4V. However, the accuracy and capability of the proposed models for the prediction of shear localization onset have not been investigated yet. In this study, the effect of different constitutive material models in the prediction of shear localization onset has been investigated. Different material models are studied including the Johnson-Cook (J-C) material model with Cockcroft-Latham damage model, J-C material model with a J-C damage model, models based on modified J-C material models (MJ-C) with strain softening terms, and material model with power-law type strain hardening and strain rate sensitivity, with polynomial thermal softening and polynomial temperature-dependent damage. The results of the finite element models are verified using orthogonal cutting experiments in terms of chip morphology and machining forces. Metallography techniques are used along with SEM observations to elucidate the distinction between continuous and shear localized chips. The results of this study indicate that three models are capable of predicting shear localization onset. However, when compared to the experiments, where a critical cutting speed of 2.8 m/min is obtained for shear localization onset, the results revealed that the model proposed by Sima and Ozel (2016) which is a model based on MJ-C model with temperature-dependent overarching modifier and temperature-dependent material model parameters is more accurate for the prediction of shear localization onset during machining Ti6Al4V. This model is shown to reveal a good prediction for the machining forces as well.
  • Thumbnail Image
    Article
    Citation - WoS: 11
    Citation - Scopus: 17
    Machinability Evaluations of Austempered Ductile Iron and Cast Steel With Similar Mechanical Properties Under Eco-Friendly Milling Conditions
    (Elsevier, 2021) Eraslan, Dogancan; Balci, Ahmet; Cetin, Baris; Ucak, Necati; Cicek, Adem; Yilmaz, Okan Deniz; Davut, Kemal
    In engineering applications, to increase productivity and to decrease production costs, the selection of the proper engineering material is essential. At that point, machining operations directly affect the production costs. Therefore, determination of the material with the desired mechanical properties and easy-to-cut characteristics has a critical importance. This situation is currently gaining more importance in especially defense industry applications in which high strength engineering materials are heavily employed. In addition, tool performance and final product quality are directly influenced by the cooling and/or lubrication conditions in particularly interrupted cutting operations. In this study, machinability characteristics of G18NiMoCr3-6+QT1 cast steel (CS) and 1050-6 austempered ductile iron (ADI) with similar mechanical properties during milling operations were investigated. The tests were performed using TiAlN coated cemented carbide (WC-Co) end mills under dry, conventional cutting fluid (CCF), and minimum quantity lubrication (MQL) conditions. Under each condition, the variations of cutting forces, tool wear, average surface roughness (Ra), and subsurface microstructure and microhardness were analyzed for both materials and then compared to one another. Test results showed that 1050-6 ADI led to further tool wear in comparison to G18NiMoCr3-6+QT1 CS. According to obtained results, dry condition is more favorable than CCF and MQL conditions in terms of cutting forces, surface roughness, and tool wear for both types of material. In addition, examinations on subsurface microstructures showed that MQL conditions provided an effective cutting environment to maintain microstructural stability of workpiece materials. (c) 2021 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).