39 results
Search Results
Now showing 1 - 10 of 39
Article Citation - WoS: 10Alkaline Hydrothermal Synthesis, Characterization, and Photocatalytic Activity of Tio2 Nanostructures: the Effect of Initial Tio2 Phase(Amer Scientific Publishers, 2019) Erdogan, Nursev; Park, Jongee; Choi, Woohyuk; Kim, Soo Young; Ozturk, AbdullahOne-dimensional (1D) titanate nanostructures were synthesized by hydrothermal route, using commercially available TiO2 (P25) and anatase powders as precursor materials and strong NaOH solution as catalyzer. The prepared titanates were calcined, followed by protonation to produce TiO2 nanostructures having enhanced photocatalytic and photovoltaic properties. The synthesized TiO2 1D nanostructures were characterized using field-emission scanning electron microscope, high-resolution electron microscope, X-ray diffraction analysis, and UV-Vis photospectroscopy to understand the effect of initial TiO2 phase on morphological and crystallographic features, and bandgap. Methylene blue degradation test was applied to evaluate the photoactivity of the products obtained after different stages of the process. The findings indicate that 1D TiO2 nanostructures form by different mechanisms from dissolved aggregates during hydrothermal process, depending on the crystal structure of the initial precursor used. Photocatalytic test results reveal that protonated titanates have considerable adsorption capability, while photocatalytic degradation depends on TiO2 transformation.Article Citation - WoS: 25Citation - Scopus: 26Identifying the Potentials for Charge Transport Layers Free N-P Homojunction-Based Perovskite Solar Cells(Pergamon-elsevier Science Ltd, 2022) Khan, Danish; Sajid, Sajid; Khan, Suliman; Park, Jongee; Ullah, IhsanPerovskite solar cells (PSCs) with no charge transport layers (CTLs) could be one of the major device architectures for the production of simple and low-cost devices. However, CTLs-free PSCs based on n-p homojunction have yet to show high power conversion efficiency (PCE), which is most likely due to inadequate light-and charge-management in the p-type perovskite. The device operation is examined using Solar Cell Capacitance Simulator (SCAPS)-software, and a novel n-p homojunction design is proposed to attempt efficient CTLs-free PSCs. Several aspects of p-type layer that can affect device performance, such as acceptor density, photon harvesting capability, defects density, and resistances to the transport of charge-carriers are scrutinized and adjusted. Furthermore, the effects of different work-functions of metal electrodes are examined. A suitable acceptor concentration is required for oriented charge transport. It is determined that a p-type perovskite with a thickness of 0.3 mu m is advantageous for high performance. A metal electrode with a high work-function is essential for efficient device. Consequently, a PCE of 15.60% is obtained with an optimal defect density of E15 cm(-3), indicating that n-p homojunction-based CTLs-free PSCs are promising since they simplify the device design and fabrication process while retaining an acceptable PCE.Article Citation - WoS: 31Citation - Scopus: 37Effect of Initial Water Content and Calcination Temperature on Photocatalytic Properties of Tio2 Nanopowders Synthesized by the Sol-Gel Process(Elsevier Sci Ltd, 2015) Agartan, Lutfi; Kapusuz, Derya; Park, Jongee; Ozturk, AbdullahThe effects of initial water content and calcination temperature on sol gel synthesized TiO2 powders were studied. Mother solutions had water/Ti-precursor mole ratios (R ratio) of 1, 5, 10, and 50. Dried aerogels were calcined for 3 h at temperatures of 300, 400, and 500 degrees C to obtain crystallized TiO2 nanopowders in the range of 15-30 nm. PE-scanning electron microscopy and X-ray diffraction techniques were employed to investigate the morphological and structural properties of the nanopowders synthesized. Profound effect of gel viscosity was observed on the formation mechanism and extent of crystallinity in the powders. Methylene blue degradation test results suggest, photocatalytic performance is enhanced as initial water content and calcination temperature increased. Band-gap energy of the powders ranged from 3.09 to 3.27 eV. Overall, this study shows that initial water content and calcination regime have a profound effect on the phase assembly, crystallite size, band-gap energy, and photocatalytic performance of sol gel synthesized TiO2 nanopowders. (C) 2015 Elsevier Ltd and Techna Group S.r.l. All rights reserved.Conference Object Citation - WoS: 2Citation - Scopus: 4Influence of Boron And/Or Zirconium Doping on Morphology and Optical Properties of Titania(Tanger Ltd, 2011) Kapusuz, Derya; Park, Jongee; Ozturk, Abdullah; Metallurgical and Materials EngineeringSol-gel derived B (boron) and Zr (zirconium) doped TiO2 (Titania) nanoparticles were synthesized. Microstructural, photocatalytic and crystallographic properties of the doped particles were investigated. Highest photocatalytic activity was achieved by 10 wt% Zr doping. 5 wt% doping was the optimum value for effective B doping. B ions were found to form oxygen vacancies behaving as interstitial defects whereas Zr ions substituted Ti4+ ions in the lattice.Article Citation - WoS: 57Citation - Scopus: 68Mechanical Properties of B4c-sic Composites Fabricated by Hot-Press Sintering(Elsevier Sci Ltd, 2020) So, Sung Min; Choi, Woo Hyuk; Kim, Kyoung Hun; Park, Joo Seok; Kim, Min Suk; Park, Jongee; Kim, Hyung SunWe fabricated boron carbide-silicon carbide (B4C-SiC) composites by hot-press sintering without additives and evaluated the crystal phase, relative density, microstructure, and mechanical properties of the sintered body. When B4C and SiC were uniformly dispersed in the composite, crystal growth was inhibited, and a sintered body with a fine and uniform microstructure, with improved mechanical properties, was fabricated. The relative density of B4C-SiC composites sintered at temperatures lower than 2000 degrees C and 40 MPa of pressure exceeded 99.8%, and the bending strength and Vickers hardness at B4C 50 wt% were 645 MPa and 30.6 GPa, respectively.Article Citation - WoS: 12Citation - Scopus: 11Enhanced Bioactivity and Low Temperature Degradation Resistance of Yttria Stabilized Zirconia/Clay Composites for Dental Applications(Elsevier Sci Ltd, 2022) Tufan, Yigithan; Park, Jongee; Ozturk, Abdullah; Ercan, BaturYttria stabilized zirconia (YSZ)/clay composites were produced to improve osseointegration and undesired tetragonal-to-monoclinic phase transformation (low temperature degradation, LTD) of YSZ ceramics so that long-term clinical success of YSZ implants is achieved. Various amounts (0.5,1,2, and 4 wt%) of clay was incorporated to YSZ. Predetermined amounts of clay and YSZ were mixed and pressed uniaxially at 15 MPa into compacts that were subsequently pressureless sintered at 1450 degrees C. Density, compressive strength, hardness and indentation crack resistance of 4 wt% clay incorporated YSZ/clay composite were 5.77 +/- 0.01 g/cm3, 1188 +/- 121 MPa, 1223 +/- 9 HV, and 4.4 +/- 0.1 MPa root m, respectively. Additionally, biological properties of YSZ/clay composites were assessed in vitro using bone cells. Incorporation of 4 wt% clay significantly enhanced bone cell prolifer-ation, spreading, and functions. Moreover, a significant increase in the LTD resistance of YSZ was achieved upon 4 wt% clay incorporation. The findings collectively suggest that YSZ/clay composites have a potential to be used as an alternative material for dental applications.Article Citation - WoS: 32Citation - Scopus: 28Photocatalytic activity of hydroxyapatite-precipitated potassium titanate whiskers(Elsevier Science Sa, 2010) Park, JongeePhotocatalytic properties of hydroxyapatite (HAP)-precipitated multifunctional potassium titanate (KT) whiskers were investigated in terms of the decomposition of methylene blue (MB) in aqueous solution under UV irradiation. Hydroxyapatite was formed on the surface of KT whiskers through a biomimetic process in simulated body fluid (SBF). The SBF used in this investigation had concentrations of calcium and phosphate ions 10 times greater than those of human plasma. Results revealed that hydroxyapatite precipitation enhanced the photocatalytic activity of the KT whiskers. In the case of unreacted KT whisker, complete degradation of methylene blue took 5.5 h, on the other hand degradation time decreased to 3.5 h when the whisker was precipitated with hydroxyapatite. (C) 2009 Elsevier B.V. All rights reserved.Article Citation - WoS: 10Citation - Scopus: 10Computational Insight of Lithium Adsorption and Intercalation in Bilayer Tic3(Pergamon-elsevier Science Ltd, 2024) Park, Jongee; Fatima, Syeda AfrinishLithium-ion batteries (LIBs) have gained significant attention owing to their long lifespan. However, these batteries offer unmatched energy storage capacity and suffer from restricted lithium-ion mobility within the electrodes. Here, we employ first-principles calculation to investigate the two-dimensional TiC3 bilayer material. The results exhibit a remarkably high specific capacity of 1277 mAh/g and a low diffusion energy barrier of 0.12 eV. The TiC3 bilayer is anticipated to show high electrical conductivity, maintaining its metallicity due to strong bonding with four Li atoms. Additionally, its high thermal and dynamic stabilities are expected to significantly enhance the battery performance. Notably, the AB stacking bilayer TiC3 experiences a mere 6.01 % increase in volume, considerably smaller compared to the 28 % increase observed in the SiC bilayer. This suggests that TiC3 bilayers remain intact even at the highest concentration of lithium adsorptions. We also explored the solidelectrolyte interface (SEI) formation at the outset of battery operation using reactive force field molecular dynamics simulation. The reactive products of SEI are nicely matched with previous experimental and theoretical findings. All these intriguing properties position the TiC3 bilayer as an exceptionally promising material for use in LIBs.Article Citation - WoS: 44Citation - Scopus: 43Silver-Loaded Tio2 Powders Prepared Through Mechanical Ball Milling(Elsevier Sci Ltd, 2013) Aysin, Basak; Ozturk, Abdullah; Park, JongeeSilver (Ag) was loaded on TiO2 powders through mechanical ball milling. Ag-loading was accomplished by adding 4.6, 9.2, and 13.8 ml of AgNO3 solution to the TiO2 powders during the milling process. The resulting powder was characterized by XRD, XPS, SEM, and EDS. The photocatalytic activity of the silver-loaded powder was evaluated in terms of the degradation of methyl orange (MO) solution under ultraviolet (UV) illumination. XRD patterns were refined using the Rietveld analysis to determine the lattice parameters. XRD analysis suggested that Ag was loaded on TiO2 powders in the form of AgO. X-ray photoelectron spectroscopy and Rietveld analysis revealed that silver did not dope into the crystal structure of TiO2. SEM investigations confirmed that ball milling caused a decrease in the average particle size of the powders. Silver-loading improved the photocatalytic activity of the TiO2 powders. The TiO2 powder ball milled without Ag-loading degraded 46% of the MO solution whereas the ball milled with 13.8 ml AgNO3 solution degraded 96% of the MO solution under 1 h UV irradiation. Moreover, TiO2 powders gained antibacterial property after Ag-loading. (c) 2013 Elsevier Ltd and Techna Group S.r.l. All rights reserved.Article Citation - WoS: 21Citation - Scopus: 25Inorganic Hole Transport Materials in Perovskite Solar Cells Are Catching Up(Elsevier Sci Ltd, 2023) Sajid, Sajid; Alzahmi, Salem; Ben Salem, Imen; Park, Jongee; Obaidat, Ihab M.More research is required to further optimize device efficiency, stability, and reduce the materials cost as perovskite solar cells (PSCs) approach to industrialization. Modulating the optoelectronic features and chemical coupling of the hole transport materials (HTMs) remains a prominent field of study in PSCs due to the significant impact these materials have on the device performance and stability. In order to speed up the commercialization of these cells, it is also important to use cost-effective HTMs in PSCs. InorganicHTMs are superior to other types of HTMs in terms of their advantages in boosting device performance and producing PSCs at a reasonable cost, in addition to their superior charge transport capabilities, desired energy levels, and intrinsic thermal and chemical stability. A detailed overview of inorganicHTMs, including metal oxides, cyanates, phthalocyanines, chalcogenides, nitrides, and carbides, is presented in this review. After briefly discussing the primary physical and optoelectronic characteristics of inorganic-HTMs, the critical functions of the above-mentioned materials as HTMs in PSCs are addressed. This review concludes by offering suggestions for future research that could considerably boost the performance of the PSCs with cost-effective inorganic-HTMs.
