78 results
Search Results
Now showing 1 - 10 of 78
Article W-Band RCS Prediction of Small Objects: Comparing Two Widely Used Methods with Experimental Validation(Gazi University, 2025) Kara, Ali; Aydın, Elif; Yardım, Funda Ergün; Sezgin, DenizThis paper compares the accuracy of Shooting and Bouncing Rays and Electric Field Integral Equation methods for Radar Cross Section prediction of small objects at 77-81 GHz band. Existing studies on RCS prediction methods often lack comprehensive comparisons between computational and experimental results, particularly for small objects measured with a 77 GHz radar. This study addresses this gap by presenting an in-depth analysis of both simulation and measurement data. In this work, three targets with varying geometries and materials were measured with a frequency modulated continuous wave radar and simulated using Ansys HFSS and CST Studio Suite. The measurements were performed with a commercial off-the-shelf (COTS) frequency modulated continuous wave radar operating at 77–81 GHz. This study aims to emphasize the importance of considering both efficiency and accuracy when opting for an RCS prediction method. Overall, the outcomes of both methods have largely demonstrated good alignment. It has been noted that, while Shooting and Bouncing Rays method offers promising time-saving advantages, Electric Field Integral Equation method remains a valuable tool for complex geometries where precise results are crucial.Article Citation - WoS: 31Citation - Scopus: 40Variational Mode Decomposition-Based Radio Frequency Fingerprinting of Bluetooth Devices(Ieee-inst Electrical Electronics Engineers inc, 2019) Aghnaiya, Alghannai; Ali, Aysha M.; Kara, AliRadio frequency fingerprinting (RFF) is based on identification of unique features of RF transient signals emitted by radio devices. RF transient signals of radio devices are short in duration, non-stationary and nonlinear time series. This paper evaluates the performance of RF fingerprinting method based on variational mode decomposition (VMD). For this purpose, VMD is used to decompose Bluetooth (BT) transient signals into a series of band-limited modes, and then, the transient signal is reconstructed from the modes. Higher order statistical (HOS) features are extracted from the complex form of reconstructed transients. Then, Linear Support Vector Machine (LVM) classifier is used to identify BT devices. The method has been tested experimentally with BT devices of different brands, models and series. The classification performance shows that VMD based RF fingerprinting method achieves better performance (at least 8% higher) than time-frequency-energy (TFED) distribution based methods such as Hilbert-Huang Transform. This is demonstrated with the same dataset but with smaller number of features (nine features) and slightly lower (2-3 dB) SNR levels.Article Citation - WoS: 3Citation - Scopus: 3Modeling and Measurement of Human Body Blockage Loss at 28 Ghz(Taylor & Francis Ltd, 2023) Benzaghta, Mohamed; Gokdogan, Bengisu Yalcinkaya; Coruk, Remziye Busra; Kara, AliMillimeter-wave (mm-Wave) spectrum is an essential enabler to the fifth generation (5G) wireless technology. Humans are one of the most noticeable blockers that cause temporal variation in indoor radio channels. This paper presents human blockage measurements at 28 GHz, with several humans of different sizes. The effect of the crossing orientations of the human bodies is investigated for three different transmitter heights. A human blockage model based on the Fresnel diffraction scheme is shown to be applicable in estimating the human blockage loss in indoor radio links considering various body sizes, different crossing orientations, and different transmitter heights. The findings reported in this paper could help improve indoor radio channel models at 28 GHz bands for 5G technologies considering the presence of human body blockages.Conference Object Citation - WoS: 17Citation - Scopus: 23Maintenance, Sustainability and Extendibility in Virtual and Remote Laboratories(Elsevier Science Bv, 2011) Kara, Ali; Ozbek, Mehmet Efe; Cagiltay, Nergiz Ercil; Aydin, ElifThis study presents discussions on sustainability of Virtual and Remote Laboratories (VRL), and provides challenges toward maintenance of VRLs. Technical and pedagogical issues in extension and sustenance of VRLs are discussed with the experiences of the authors gained in the development of a VRL system, European Remote Radio Laboratory (ERRL) platform. Moreover, the study presents actions to be taken in sustenance plan and expendability of VRL system with the advances in Information and Communication Technologies (ICT) and educational technologies along with the needs of educators and learners in formal education. (C) 2011 Published by Elsevier Ltd.Article Citation - WoS: 5Citation - Scopus: 10Quality of Service Assessment: a Case Study on Performance Benchmarking of Cellular Network Operators in Turkey(Tubitak Scientific & Technological Research Council Turkey, 2015) Kadioglu, Rana; Dalveren, Yaser; Dalveren, Yaser; Kara, Ali; Kara, Ali; Dalveren, Yaser; Kara, Ali; Department of Electrical & Electronics Engineering; Department of Electrical & Electronics EngineeringThis paper presents findings on performance benchmarking of cellular network operators in Turkey. Benchmarking is based on measurements of standard key performance indicators (KPIs) in one of the metropolitan cities of Turkey, Ankara. Performance benchmarking is formulated by incorporating customer perception by conducting surveys on how important KPIs are from the user's point of view. KPIs are measured, with standard test equipment, by drive test method on specified routes. According to the performance benchmarking results, the GSM and UMTS network operators achieving the best performance were determined in Ankara. Speech qualities of network operators, as the most popular service, were also evaluated by several statistical methods including pdf/cdf analysis and chi-square and Fisher's exact tests. The network operator providing the highest speech quality in Ankara was determined with the methods applied. Overall, the results and approaches on benchmarking of cellular networks in Turkey are reported for the first time in this paper. The approaches proposed in this paper could be adapted to wide-scale benchmarking of services in cellular networks.Article Citation - WoS: 17Citation - Scopus: 31Deep Learning-Based Vehicle Classification for Low Quality Images(Mdpi, 2022) Tas, Sumeyra; Sari, Ozgen; Dalveren, Yaser; Pazar, Senol; Kara, Ali; Derawi, MohammadThis study proposes a simple convolutional neural network (CNN)-based model for vehicle classification in low resolution surveillance images collected by a standard security camera installed distant from a traffic scene. In order to evaluate its effectiveness, the proposed model is tested on a new dataset containing tiny (100 x 100 pixels) and low resolution (96 dpi) vehicle images. The proposed model is then compared with well-known VGG16-based CNN models in terms of accuracy and complexity. Results indicate that although the well-known models provide higher accuracy, the proposed method offers an acceptable accuracy (92.9%) as well as a simple and lightweight solution for vehicle classification in low quality images. Thus, it is believed that this study might provide useful perception and understanding for further research on the use of standard low-cost cameras to enhance the ability of the intelligent systems such as intelligent transportation system applications.Conference Object Citation - WoS: 2New Wavelet-Based Features for the Recognition of Jittered and Stagger Pri Modulation Types(Ieee, 2015) Gencol, Kenan; Kara, Ali; At, NurayIn dense electronic warfare environments, numerous emitters can be active simultaneously and an interleaved stream of pulses in natural time of arrival order is received by the Electronic Support Measures (ESM) receiver. It is the task of the ESM system to de-interleave this mixed pulse sequence and thus to identify the surrounding threatening emitters. In this processing, pulse repetition interval (PRI) modulation recognition has a significant role due to the fact that it can reveal the hidden patterns inside pulse repetition intervals and thus help identify the emission source and its functional purpose. In this paper, we propose new wavelet-based features for the recognition of jittered and stagger PRI modulation types. The recognition of these types are heavily based on histogram features. Experimental results show that the proposed feature set have very high recognition rates and outperform histogram based methods.Conference Object Citation - WoS: 1An Industry Sponsored Undergraduate Research (ur) Experience: Preliminary Study on Fulfillment of Program Outcomes and Industry Requirements(Ieee, 2014) Kapusuz, Kamil Yavuz; Kara, AliThis study presents educational results of an industry sponsored undergraduate research (UR) project. The aim of the study is to show how such project works contribute to students in acquiring qualifications or skills necessary by the industry, and abilities regarding with program outcomes of accreditation organisations. The study is based on quantitative (surveys) and qualitative (self descriptions) data collected from senior students who worked in 9 months UR project sponsored by a company in Radio frequency (RF) and Communications domain. The preliminary results showed that an industry sponsored undergraduate research project may serve to both short term (industry requirements) and longer term (program outcomes) expectations in undergraduate curriculum of engineering departments.Article Citation - WoS: 19Citation - Scopus: 20Human Body Shadowing Variability in Short-Range Indoor Radio Links at 3-11 Ghz Band(Taylor & Francis Ltd, 2009) Kara, AliMeasurement results for human body shadowing and local environmental effects in short-range indoor radio channels are presented. A narrowband measurement system, comprising a signal generator, two identical triangular monopoles and a spectrum analyser, was used in the measurements. When the radio link was periodically blocked by a human body with various objects in and around the link, fading depths of up to 15dB and even more were observed at spot frequencies of 3-11GHz band. Standard deviation and its range for human body blockage are estimated for different radio link scenarios simulating real environments. The distribution of human body shadowing was analysed and compared with known distribution functions.Article Citation - WoS: 4Citation - Scopus: 8Remote Rf Laboratory Requirements: Engineers' and Technicians' Perspective(Anadolu Univ, 2007) Cagiltay, Nergiz Ercil; Aydin, Elif Uray; Kara, Ali; Department of Electrical & Electronics Engineering; Software EngineeringThis study aims to find out requirements and needs to be fulfilled in developing remote Radio Frequency (RF) laboratory. Remote laboratories are newly emerging solutions for better supporting of e-learning platforms and for increasing their efficiency and effectiveness in technical education. By this way, modern universities aim to provide lifelong learning environments to extend their education for a wider area and support learners anytime and anywhere when they need help. However, as far as the authors concern, there is no study investigating the requirements and needs of remote laboratories in that particular field in the literature. This study is based on electrical engineers' and technicians' perspectives on the requirements of a remote laboratory in RF domain. Its scope covers investigation of the participants' perceptions toward computer mediated communication and it attempts to answer the questions: which studying strategies are preferred by the learners and what kind of RF laboratory content should be provided. The analysis of the results showed that, geographic independence, finding quickly the elements of past communication and temporal independence are declared as the most important advantages of computer-mediated communication. However, reading significant amount of information is a problem of these environments. In the context of how to show the content, respondents want to see shorter text on the screen. Therefore the instructions should include little amount of text and must be supported with figures and interactive elements. The instructional materials developed for such learner groups should support both linear and non-linear instructions. While analyzing the content to be provided, we have seen that, most of the participants do not have access to high level equipments and traditional experiments are considered as the necessary ones for both engineers and technicians.
