4 results
Search Results
Now showing 1 - 4 of 4
Article Citation - WoS: 68Citation - Scopus: 69Composite Membrane by Incorporating Sulfonated Graphene Oxide in Polybenzimidazole for High Temperature Proton Exchange Membrane Fuel Cells(Pergamon-elsevier Science Ltd, 2022) Devrim, Yilser; Durmus, Gizem Nur BulanikThe objective of this work is to examine the polybenzimidazole (PBI)/sulfonated graphene oxide (sGO) membranes as alternative materials for high-temperature proton exchange membrane fuel cell (HT-PEMFC). PBI/sGO composite membranes were characterized by TGA, FTIR, SEM analysis, acid doping&acid leaching tests, mechanical analysis, and proton conductivity measurements. The proton conductivity of composite membranes was considerably enhanced by the existence of sGO filler. The enhancement of these properties is related to the increased content of -SO3H groups in the PBI/sGO composite membrane, increasing the channel availability required for the proton transport. The PBI/sGO membranes were tested in a single HT-PEMFC to evaluate high-temperature fuel cell performance. Amongst the PBI/sGO composite membranes, the membrane containing 5 wt. % GO (PBI/sGO-2) showed the highest HT-PEMFC performance. The maximum power density of 364 mW/cm(2) was yielded by PBI/sGO-2 membrane when operating the cell at 160 degrees C under non humidified conditions. In comparison, a maximum power density of 235 mW/cm(2) was determined by the PBI membrane under the same operating conditions. To investigate the HT-PEMFC stability, long-term stability tests were performed in comparison with the PBI membrane. After a long-term performance test for 200 h, the HT-PEMFC performance loss was obtained as 9% and 13% for PBI/sGO-2 and PBI membranes, respectively. The improved HT-PEMFC performance of PBI/sGO composite membranes suggests that PBI/sGO composites are feasible candidates for HT-PEMFC applications. (C) 2022 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.Article Citation - WoS: 14Citation - Scopus: 14High-Temperature Electrochemical Hydrogen Separation From Reformate Gases Using Pbi/Mof Composite Membrane(Pergamon-elsevier Science Ltd, 2023) Durmus, Gizem Nur Bulanik; Eren, Enis Oguzhan; Devrim, Yilser; Colpan, C. Ozgur; Ozkan, NecatiIn this paper, the high-temperature electrochemical Hydrogen (H2) purification perfor-mance of a polybenzimidazole/UIO-66 metal-organic framework (PBI/UIO-66) membrane is investigated and analyzed at different values of current, temperature, and reformate feed composition. Purification measurements show that a significant reduction in gas impu-rities can be obtained. In the performance tests, three different ratios of reformate gas (RG) (H2:carbon dioxide (CO2):carbon monoxide (CO)) as RG-1= (75:25:0), RG-2= (75:22:3), and RG-3= (95:0:5) were used. The highest purification values were observed at 160 & DEG;C as 99.999%, 99.931%, and 99.708% for RG-1, RG-2, and RG-3, respectively. The obtained results show that an electrochemical H2 purification (ECHP) based on PBI/UIO-66 composite membrane is promising for H2 purification.& COPY; 2023 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.Article Citation - WoS: 26Citation - Scopus: 30Micro-Cogeneration Application of a High-Temperature Pem Fuel Cell Stack Operated With Polybenzimidazole Based Membranes(Pergamon-elsevier Science Ltd, 2020) Budak, Yagmur; Devrim, YilserHigh temperature Proton Exchange Membrane Fuel Cells (HT-PEMFC) have attracted the attention of researchers in recent years due to their advantages such as working with reformed gases, easy heat management and compatibility with micro-cogeneration systems. In this study, it is aimed to designed, manufactured and tested of the HT-PEMFC stack based on Polybenzimidazole/Graphene Oxide (PBI/GO) composite membranes. The micro-cogeneration application of the PBI/GO composite membrane based stack was investigated using a reformat gas mixture containing Hydrogen/Carbon Dioxide/Carbon Monoxide (H-2/CO2/CO). The prepared HT-PEMFC stack comprises 12 cells with 150 cm(2) active cell area. Thermo-oil based liquid cooling was used in the HT-PEMFC stack and cooling plates were used to prevent coolant leakage between the cells. As a result of HTPEMFC performance studies, maximum 546 W and 468 W power were obtained from PBI/ GO and PBI membranes based HT-PEMFC stacks respectively. The results demonstrate that introducing GO into the PBI membranes enhances the performance of HT-PEMFC technology and demonstrated the potential of the HT-PEMFC stack for use in micro cogeneration applications. It is also underlined that the developed PBI/GO composite membranes have the potential as an alternative to commercially available PBI membranes in the future. (c) 2019 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.Conference Object Citation - WoS: 34Citation - Scopus: 39Development of a One-Dimensional and Semi-Empirical Model for a High Temperature Proton Exchange Membrane Fuel Cell(Pergamon-elsevier Science Ltd, 2018) Nalbant, Yagmur; Colpan, C. Ozgur; Devrim, YilserHigh temperature proton exchange membrane fuel cells (HT-PEMFC), which operate between 160 degrees C and 200 degrees C, can be generally used in portable and stationary power generation applications. In this study, a one-dimensional, semi-empirical, and steady-state model of a HT-PEMFC fed with a gas mixture consisting of hydrogen and carbon monoxide is developed. Some modeling parameters are adjusted using empirical data, which are obtained conducting experiments on a HT-PEMFC for different values of Pt loading and cell temperature. For adjusting these parameters, the total summation of the square of the difference between the cell voltages found using the experimental and theoretical methods is minimized using genetic algorithm. After finding the values of the adjusted parameters, the effects of different cell temperature, Pt loading, phosphoric acid (PA) percentage, and different binders (PBI and PVDF) on the performance of the fuel cell are examined. It was found that, the performance of the fuel cell using PVDF binder exhibited better performance as compared to that using PBI binder. (c) 2017 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
