17 results
Search Results
Now showing 1 - 10 of 17
Article Citation - WoS: 16Citation - Scopus: 16Electrochemical and Optical Characterization of a Multielectrochromic Copolymer Based on 3,4-Ethylenedioxythiophene and Functionalized Dithienylpyrrole Derivative(Pergamon-elsevier Science Ltd, 2019) Tutuncu, Esra; Ozkut, Merve Icli; Balci, Burcu; Berk, Hasan; Cihaner, AtillaA novel conjugated copolymer, namely poly(3,4-ethylenedioxythiophene-co-1-(3,5-bis(trifluoromethyl)phenyl)-2,5-di(thiophen-2-yl)-1H-pyrrole) (P(EDOT-co-1)) was synthesized via electropolymerization method from a mixture of 3,4-ethylenedioxythiophene and 1-(3,5-bis(trifluoromethyl)phenyl)-2,5-di(thiophen-2-yl)-1H-pyrrole comonomers. The corresponding copolymer has an optical band gap of 1.7 eV and 41% optical contrast at 525 nm with a coloration efficiency of 258 cm(2)/C and 1.4 s switching time. The copolymer has a multi-electrochromic behavior: It has dark purple, purple, gray, green and cyan colors at different oxidation states. Electrochemical stability of P(EDOT-co-1) copolymer was also investigated and it was observed that the copolymer retained 86% of its stability under ambient conditions in the presence of oxygen (without purging the electrolyte solution with any inert gas) according to the current density and 83% according to the deposited charge even after 1000 redox cycles.Article Synthesis and Electropolymerization of a Selenophene Based Chemiluminescent Monomer and Its Use in Blood Detection(Elsevier Sci Ltd, 2025) Balci, Burcu; Cakal, Deniz; Cihaner, AtillaA new selenophene based trimeric chemiluminescent compound, namely 5,7-di(selenophen-2-yl)-2,3-dihydrothieno[3,4-d]pyridazine-1,4-dione (S2T-Lum), was synthesized in two steps via electron donor-acceptor-donor approach. Its chemiluminescent reaction with hydrogen peroxide was investigated in an alkaline solution in the presence of various catalysts such as different metal ions, hemin and blood samples and the results were compared with its thiophene analogue (T2T-Lum) and luminol. It was found that S2T-Lum was very sensitive to copper(II) and iron(III) ions, and blood samples. Also, it can be easily concluded that S2T-Lum as a new member of luminol type compounds is a potential candidate for the detection of blood findings in forensic science. Furthermore, S2T-Lum has an irreversible oxidation peak at 1.28 V vs Ag/AgCl, which is responsible from its electropolymerization. S2T-Lum was successfully polymerized electrochemically via potentiodynamic electrolysis without cleavage of its chemiluminescent active appendage. To the best of our knowledge, its corresponding polymer PS2T-Lum film is the first member of selenophene based luminol type electroactive polymers.Article Citation - WoS: 8Citation - Scopus: 8Improvement of Optical Properties and Redox Stability of Poly(3,4-Ethylenedioxythiophene)(Elsevier Sci Ltd, 2018) Ertan, Salih; Cihaner, AtillaIn order to improve the optical properties and redox stability of poly(3,4-ethylenedioxythiophene) (PEDOT) without changing its electrochemical and electrochromic behaviour, it was supported with alkyl-substituted polyhedral oligomeric silsesquioxane (POSS) cage. The corresponding copolymers were obtained electrochemically via potentiostatic or potentiodynamic methods and compared to the parent homopolymers. Electrochemical polymerization of EDOT and POSS containing EDOT called EDOT-POSS in various monomer feed ratios was performed in an electrolyte solution of 0.1 M TBAPF(6) dissolved in a mixture of dichloromethane and acetonitrile (1/3: v/v). Just as PEDOT, the copolymers represented the similar band gap (1.61 eV), redox and electrochromic behaviors. On the other hand, when compared to the parent PEDOT, the presence of POSS cages in the copolymer backbone improved the redox stability and optical properties of PEDOT such as higher percent transmittance change (65% at 621 nm), higher transparency at oxidized state, lower switching time (similar to 1.0 s) and higher coloration efficiency (463 cm(2)/C for 95% switching) as well as higher electrochemical stability (86% of its electroactivity retains after 1750 cycles under ambient conditions).Article Citation - WoS: 8Citation - Scopus: 8Electropolymerization and Ion Sensitivity of Chemiluminescent Thienyl Systems(Pergamon-elsevier Science Ltd, 2009) Asil, Demet; Cihaner, Atilla; Onal, Ahmet M.Redox driven chemiluminescent (CL) compounds based on thienyl and pyridazine systems, namely 2,3-dihydrothieno(3,4-d)pyridazine-1,4-dione (T-Lum) and 5,7-di-thiophen-2-yl-2,3-dihydrothieno[3,4-d]pyridazine-1,4-dione (TTT-Lum), were synthesized. Soluble compounds both in organic media and basic aqueous solution were found to give CL and electroluminescent (EL) reactions by the treatment of oxidants (H2O2 and KMnO4) and by an external potential pulse on the working electrode, respectively. Furthermore, the CL reaction can be speeded up by Fe3+ ion or blood samples. On the other hand, one of the compounds. TTT-Lum, can be polymerized successfully via electrochemically both in 0.1 M LiClO4/acetonitrile containing 5% of borontrifluoro diethylether (BF3-Et2O) and neat BF3-Et2O solution. The corresponding polymer film (PTTT-Lum) bearing CL units has a very stable and a well-defined reversible redox couple. Also, the electrochromic polymer film has a band gap of 1.74 eV and exhibits EL behavior. (C) 2009 Elsevier Ltd. All rights reserved.Article Citation - WoS: 11Citation - Scopus: 11Electrochemical and Optical Properties of Substituted Phthalimide Based Monomers and Electrochemical Polymerization of 3,4-Ethylenedioxythiophene Oligomeric Silsesquioxane (poss) Analogue(Elsevier Sci Ltd, 2019) Cakal, Deniz; Ertan, Salih; Cihaner, Atilla; Onal, Ahmet M.A new series of donor-acceptor-donor type trimeric monomers bearing substituted phthalimide units as acceptor units and thiophene and 3,4-ethylenedioxythiophene (EDOT) as donor units was synthesized and characterized. The strength of acceptor units and intramolecular charge transfer between donor and acceptor units were investigated by using electrochemical and optical methods. The main advantage of phthalimide unit over other acceptor units is the ease of its functionalizability. Thus, utilizing this property, a phthalimide derivative (E2P-POSS) bearing polyhedral oligomeric silsesquioxane (POSS) cage was introduced successfully with EDOT and polymerized electrochemically. The corresponding electroactive polymer, PE2P-POSS, has a band gap of 1.72 eV and is an electrochromic polymer: gray when neutralized and eggplant purple when oxidized.Article Citation - WoS: 30Citation - Scopus: 31Synthesis and Properties of 4,4-Difluoro (bodipy)-Based Conducting Copolymers(Elsevier, 2009) Cihaner, Atilla; Algi, FatihThe synthesis, characterization and engineering of a novel polymer based on a unique combination of 1,3,5,7-tetramethyl-8-(4-nitro-phenyl)-2,6-bis(2-thienyl)-4,4-difluoroboradiazaindacene and 3,4-ethylenedioxythiophene are highlighted. It was found that the polymer represents an environmentally robust electroactive material bearing high stability, well-defined quasi-reversible redox couple, and fast response time between redox states as well as high coloration efficiency. (c) 2008 Elsevier Ltd. All rights reserved.Article Citation - WoS: 45Citation - Scopus: 45An Ambipolar Low Band Gap Material Based on Bodipy and Edot(Elsevier Science Bv, 2009) Algi, Fatih; Cihaner, AtillaA novel donor-acceptor type conducting polymer based on BODIPY dye as acceptor and EDOT units as donor parts is synthesized electrochemically. The unique combination of BODIPY and EDOT units provides an ambipolar (n- and p-doping processes) low band gap material (4). This is the first example of p-n junction in an organic pi-conjugated material where BODIPY unit is incorporated directly in the main chain. Furthermore, the polymer film exhibits electrochromic behavior upon p-doping: a color change from light violet (neutral) to indigo (oxidized). (C) 2009 Elsevier B.V. All rights reserved.Article Citation - WoS: 11Citation - Scopus: 12A Low Band Gap Polymer Based on Selenophene and Benzobis (thiadiazole)(Pergamon-elsevier Science Ltd, 2017) Abdulrazzaq, Mohammed; Ozkut, Merve Icli; Gokce, Gurcan; Ertan, Salih; Tutuncu, Esra; Cihaner, AtillaA new derivative of benzobis(thiadiazole) based donor-acceptor-donor type monomers, namely 4,7-di (selenophen-2-yl)benzo[1,2-c;4,5-c']bis[1,2,5]thiadiazole (SeBTSe), was synthesized and its polymerization was carried out successfully via electrochemical polymerization in an electrolyte solution of 0.1 M tetrabutylammonium hexafluorophosphate dissolved in dichloromethane. The monomer SeBTSe is a deep red chromophore and it has four redox states: one oxidation, one neutral and two reduction states. The electrochemical behaviour of the corresponding polymer called PSeBTSe was studied by cyclic and differential pulse voltammetry. There is a good agreement between electrochemical (0.62-0.66 eV) and optical (0.63 eV) bandgaps of the polymer. Like the monomer, the ambipolar polymer has four redox states and electrochromic properties: gray beige at neutral state, smoky azurite at oxidized state, beige at first reduced state and dark beige at second reduced state. (C) 2017 Elsevier Ltd. All rights reserved.Article Citation - WoS: 13Citation - Scopus: 13Effect of the Donor Units on the Properties of Fluorinated Acceptor Based Systems(Elsevier Sci Ltd, 2021) Cakal, Deniz; Akdag, Akin; Cihaner, Atilla; Onal, Ahmet M.A new series of monomers in the donor-acceptor-donor array, namely 5-fluoro-4,7-di(furan-2-yl)benzo[c][1,2,5] thiadiazole (F2BT-F), and 5-fluoro-4,7-di(selenophen-2-yl)benzo[c][1,2,5] thiadiazole (S2BT-F), bearing 5-fluorobenzo[c][1,2,5]-thiadiazole as the acceptor moiety and furan and selenophene as the electron donating groups was synthesized and polymerized electrochemically. To compare heteroatom effect, thiophene analogue of newly synthesized (FBT)-B-2-F and S2BT-F namely, (5-fluoro-4,7-di(thiophen-2-yl)benzo[c][1,2,5] thiadiazole (T2BT-F)) and its corresponding polymer were also synthesized. Effect of donor units on the electrochemical and optical properties of fluorinated acceptor based systems was investigated in terms of the effect of different sized heteroatoms in five-membered rings on the dihedral angle and planarity. Theoretical calculations also suggested a deviation from planarity upon fluorination. Moreover, electrochemically obtained polymers possess low bandgap values (1.62 eV-1.68 eV for PF2BT-F and PS2BT-F, respectively) and exhibited electrochromic properties with relatively low switching times.Article Citation - WoS: 2Citation - Scopus: 2New electrochromic copolymers based on spiro bipropylenedioxythiophene and 3,4-ethylenedioxythiophene(Elsevier Science Sa, 2014) Pekel, Lutfiye Canan; Karabay, Bads; Cihaner, AtillaTwo alkylenedioxythiophene derivatives, Spiro bipropylenedioxythiophene (Spiro-BiProDOT) and 3,4-ethylenedioxythiophene (EDOT), were integrated electrochemically in order to attain low band gap electrochromic copolymers. EDOT has a functionality of two, which causes a linear polymer, whereas Spiro-BiProDOT has a functionality of four and its polymerization results in a network polymer. Therefore, by playing the monomer feed ratio, the crosslink degree can be adjusted for the copolymers obtained electrochemically from EDOT and Spiro-BiProDOT monomers in an electrolyte solution of 0.1 M tetrabutyl ammonium hexafluorophosphate dissolved in dichloromethane. It was found that copolymers showed different electrochemical and optical properties at their various redox states when compared to their homopolymers. For example, they could be switched from dark blue in the neutral state to reddish blue at intermediate state and finally to transparent blue in the oxidized state with 45-51% of the transmittance change at 575-595 nm. pi-pi* transition bands of the copolymers can be shifted to higher wavelengths when compared to poly(Spiro-BiProDOT) by increasing the amount of the EDOT units in the polymer backbone. They have low band gaps in the range of 1.65 and 1.73 eV. (C) 2014 Elsevier B.V. All rights reserved.
