Qasrawı, Atef Fayez Hasan

Loading...
Profile Picture
Name Variants
Qasrawi, Atef Fayez
Atef Fayez Hasan, Qasrawı
Qasrawı,A.F.H.
Qasrawi,A.F.H.
Q., Atef Fayez Hasan
Q.,Atef Fayez Hasan
Atef Fayez Hasan, Qasrawi
Qasrawi, Atef Fayez Hasan
A.F.H.Qasrawı
A.F.H.Qasrawi
A., Qasrawi
A.,Qasrawı
Qasrawı, Atef Fayez Hasan
Qasrawi, A. F.
Qasrawi,A.F.
Qasrawi, AF
Qasrawi, Atef F.
Qasrawi, Atef A.
Qasrawi, Atef Fayez
Qasrawi, Atef F.
Qasrawi, Atef A.
Qasrawi, Atef
Job Title
Doçent Doktor
Email Address
atef.qasrawi@atilim.edu.tr
Main Affiliation
Department of Electrical & Electronics Engineering
Status
Former Staff
Website
ORCID ID
Scopus Author ID
Turkish CoHE Profile ID
Google Scholar ID
WoS Researcher ID

Sustainable Development Goals

NO POVERTY1
NO POVERTY
0
Research Products
ZERO HUNGER2
ZERO HUNGER
0
Research Products
GOOD HEALTH AND WELL-BEING3
GOOD HEALTH AND WELL-BEING
0
Research Products
QUALITY EDUCATION4
QUALITY EDUCATION
0
Research Products
GENDER EQUALITY5
GENDER EQUALITY
0
Research Products
CLEAN WATER AND SANITATION6
CLEAN WATER AND SANITATION
0
Research Products
AFFORDABLE AND CLEAN ENERGY7
AFFORDABLE AND CLEAN ENERGY
17
Research Products
DECENT WORK AND ECONOMIC GROWTH8
DECENT WORK AND ECONOMIC GROWTH
0
Research Products
INDUSTRY, INNOVATION AND INFRASTRUCTURE9
INDUSTRY, INNOVATION AND INFRASTRUCTURE
0
Research Products
REDUCED INEQUALITIES10
REDUCED INEQUALITIES
0
Research Products
SUSTAINABLE CITIES AND COMMUNITIES11
SUSTAINABLE CITIES AND COMMUNITIES
0
Research Products
RESPONSIBLE CONSUMPTION AND PRODUCTION12
RESPONSIBLE CONSUMPTION AND PRODUCTION
0
Research Products
CLIMATE ACTION13
CLIMATE ACTION
0
Research Products
LIFE BELOW WATER14
LIFE BELOW WATER
0
Research Products
LIFE ON LAND15
LIFE ON LAND
0
Research Products
PEACE, JUSTICE AND STRONG INSTITUTIONS16
PEACE, JUSTICE AND STRONG INSTITUTIONS
1
Research Products
PARTNERSHIPS FOR THE GOALS17
PARTNERSHIPS FOR THE GOALS
0
Research Products
This researcher does not have a Scopus ID.
This researcher does not have a WoS ID.
Scholarly Output

226

Articles

222

Views / Downloads

88/0

Supervised MSc Theses

0

Supervised PhD Theses

0

WoS Citation Count

1986

Scopus Citation Count

2002

Patents

0

Projects

0

WoS Citations per Publication

8.79

Scopus Citations per Publication

8.86

Open Access Source

17

Supervised Theses

0

JournalCount
Crystal Research and Technology16
Journal of Electronic Materials15
physica status solidi (a)12
Materials Science in Semiconductor Processing11
Journal of Alloys and Compounds11
Current Page: 1 / 11

Scopus Quartile Distribution

Competency Cloud

GCRIS Competency Cloud

Scholarly Output Search Results

Now showing 1 - 10 of 13
  • Article
    Citation - WoS: 10
    Citation - Scopus: 11
    Dispersive Optical Constants of Thermally Deposited Agin5s8< Thin Films
    (Elsevier Science Sa, 2008) Qasrawi, A. F.
    Agln(5)S(8) thin films were obtained by the thermal evaporation of Agln(5)S(8) crystals onto ultrasonically cleaned glass substrates. The films are found to exhibit polycrystalline cubic structure. The calculated lattice parameter of the unit cell (a) is 10.78 angstrom. The transmittance data of the as grown films which was recorded at 300 K in the incidence wavelength (lambda) range of 320-1000 nm are used to calculate the refractive, n(lambda). The transmittance and reflectance data are also used to calculate the absorption coefficient of the as grown Agln5S8 thin films. The fundamental absorption edge is found to be corresponding to a direct allowed transitions energy band gap. This band-to-band transition energy is found to be 1.78 eV and it is consistent with that reported for Agln(5)S(8) single crystals. (c) 2007 Elsevier B.V. All rights reserved.
  • Article
    Citation - WoS: 4
    Citation - Scopus: 4
    Physical Properties of Neodymium Tin Oxide Pyrochlore Ceramics
    (de Gruyter Poland Sp Zoo, 2017) Saleh, Adli A.; Qasrawi, A. F.; Yumusak, G.; Mergen, A.
    In this work, physical properties of neodymium tin oxide pyrochlore ceramics prepared by solid state reaction technique are investigated by means of X-ray diffraction, scanning electron microscopy, ultraviolet-visible light (UV-Vis) spectrophotometry and temperature dependent electrical resistivity measurements. The pyrochlore is observed to have a cubic FCC crystal lattice with lattice parameter of 10.578 angstrom. The planes of the cubic cell are best oriented in the [2 2 2] direction. From the X-ray, the UV-Vis spectrophotometry and the electrical resistivity data analysis, the grain size, strain, dislocation density, optical and thermal energy band gaps, localized energy band tail states and resistivity activation energies are determined and discussed. The pyrochlore is observed to have an optical energy band gap of similar to 3.40 eV. This value corresponds to 365 nm UV light spectra which nominates the neodymium tin oxide pyrochlore ceramics for the use as UV sensors.
  • Article
    Citation - WoS: 42
    Citation - Scopus: 41
    Synthesis and Characterization of Mg2b2<
    (Pergamon-elsevier Science Ltd, 2005) Qasrawi, AF; Kayed, TS; Mergen, A; Gürü, M
    Magnesium borate of the form Mg2B2O5 has been prepared and its structural and thermal properties were studied using X-ray diffraction and differential thermal analysis. An investigation of the electrical and optical properties of Mg2B2O5 system has been carried out. The electrical resistivity of the sample was measured in the temperature range of 170-400 K. The data analysis revealed an extrinsic nature of the conductivity with two impurity levels located at 0.13 and 0.71 eV in the temperature ranges of 170-230 K and 240-400 K, respectively. The optical transmission and reflection was recorded at 300 K in the incident photon energy range of 3.0-6.0 eV. The absorption coefficient data analysis revealed an indirect optical energy band gap of 4.73 eV. In addition, two impurity levels located at 3.43, and 4.49 eV were observed in the absorption spectra. (c) 2005 Elsevier Ltd. All rights reserved.
  • Article
    Citation - WoS: 18
    Citation - Scopus: 19
    Temperature Dependence of the Direct Allowed Transitions Band Gap and Optical Constants of Polycrystalline Α-in2se3< Thin Films
    (Elsevier Science Sa, 2006) Qasrawi, A. F.
    Polycrystalline alpha-In2Se3 thin films were obtained by the thermal evaporation of alpha-In2Se3 crystals onto glass substrates kept at temperature of 200 degrees C. The temperature dependence of the optical band gap in the temperature region of 300-480 K and the room temperature refractive index, it (lambda), of these films have been investigated. The absorption edge shifts to lower energy values as temperature increases. The fundamental absorption edge corresponds to a direct allowed transitions energy gap that exhibits a temperature coefficient of -8.51 x 10(-4) (eV/K). The room temperature n(lambda) which was calculated from the transmittance data allowed the identification of the oscillator strength and energy, static dielectric constant and static refractive index as 20.7 and 2.15 eV, 10.70 and 3.26, respectively. (c) 2006 Elsevier B.V. All rights reserved.
  • Article
    Citation - WoS: 4
    Citation - Scopus: 4
    Crystal Data and Indirect Optical Transitions in Tl2ingase4< Crystals
    (Pergamon-elsevier Science Ltd, 2008) Qasrawi, A. F.; Gasanly, N. M.
    The room temperature crystal data and the optical properties of the Bridgman method grown Tl2InGaSe4 crystals are reported and discussed. The X-ray diffraction technique has revealed that Tl2InGaSe4 is a single phase crystal of monoclinic structure. The unit cell lattice parameters, which were recalculated from the X-ray data, are found to be a = 0.77244 nm, b = 0.64945 nm, c = 0.92205 nm and beta = 95.03 degrees. The temperature dependence of the optical band gap of Tl2InGaSe4 single crystal in the temperature region of 290-500 K has also been investigated. The absorption coefficient was calculated from the transmittance and reflectance data in the incident photon energy range of 1.60-2.10 eV. The absorption edge is observed to shift toward lower energy values as temperature increases. The fundamental absorption edge corresponds to indirect allowed transition energy gap of 1.86 eV that exhibited a temperature coefficient gamma = -3.53 x 10(-4) eV/K. (C) 2007 Elsevier Ltd. All rights reserved.
  • Article
    Citation - WoS: 32
    Citation - Scopus: 32
    Temperature Dependence of the Band Gap, Refractive Index and Single-Oscillator Parameters of Amorphous Indium Selenide Thin Films
    (Elsevier Science Bv, 2007) Qasrawi, A. F.
    InSe thin films are obtained by evaporating InSe crystal onto ultrasonically cleaned glass substrates under pressure of similar to 10(-5) Torr. The structural and compositional analysis revealed that these films are of amorphous nature and are atomically composed of similar to 51% In and similar to 49% Se. The reflectance and transmittance of the films are measured at various temperatures (300-450 K) in the incident photon energy range of 1.1-2.1 eV. The direct allowed transitions band gap - calculated at various temperatures - show a linear dependence on temperature. The absolute zero value band gap and the rate of change of the band gap with temperature are found to be (1.62 +/- 0.01) eV and -(4.27 +/- 0.02) x 10(-4) eV/K, respectively. The room temperature refractive index is estimated from the transmittance spectrum. The later analysis allowed the identification of the static refractive index, static dielectric constant, oscillator strength and oscillator energy. (c) 2006 Elsevier B.V. All rights reserved.
  • Article
    Citation - WoS: 2
    Citation - Scopus: 1
    Hydrogen Implantation Effects on the Electrical and Optical Properties of Inse Thin Films
    (Tubitak Scientific & Technological Research Council Turkey, 2012) Qasrawi, Atef Fayez; Ilaiwi, Khaled Faysal; Polimeni, Antonio
    The effects of hydrogen ion implantation on the structural, electrical and optical properties of amorphous InSe thin films have been investigated. X-ray diffraction analysis revealed no change in the structure of the films. An implantation of 7.3 x 10(18) ions/cm(2) decreased the electrical conductivity by three orders of magnitude at 300 K. Similarly, the conductivity activation energy, which was calculated in the temperature range of 300-420 K, decreased from 210 to 78 meV by H-ion implantation. The optical measurements showed that the direct allowed transitions energy band gap of amorphous InSe films has decreased from 1.50 to 0.97 eV by implantation. Furthermore, significant decreases in the dispersion and oscillator energy, static refractive index and static dielectric constants are also observed by hydrogen implantation.
  • Article
    Citation - WoS: 3
    Citation - Scopus: 3
    Enhancement of Nonlinear Optical and Dielectric Properties of Cu2o Films Sandwiched With Indium Slabs
    (Wiley-v C H verlag Gmbh, 2020) Omar, Ahmad; Qasrawi, Atef F.
    In this work, the effects of the insertion of indium slabs of thickness 100 nm on the performance of stacked layers of Cu2O are reported. Cu2O/In/Cu2O thin films coated onto ultrasonically cleaned glass substrates are structurally, morphologically, optically, and dielectrically studied. The glassy films of Cu2O display larger, well-ordered grains in an amorphous sea of Cu2O upon insertion of indium slabs between layers of Cu2O. Optically, the indium slabs increase the light absorbability in the IR region by 12.5 times, narrow the energy bandgap, and widen the energy band tails region. They also enhance the nonlinearity in the dielectric response and increase the dielectric constant values by 2.5 times. In addition, the optical conductivity parameters are obtained from the fittings of the dielectric spectra. The analyses reveal an enhancement in the drift mobility, plasmon frequency, and free carrier density via stacking of the indium layer between layers of Cu2O. The drift mobility and plasmon frequency values reach 232.4 cm(2) V-1 s(-1) and 3.95 GHz at a reduced hole-plasmon frequency value of 6.0 x 10(14) Hz (2.48 eV). The values are promising as they indicate the applicability of Cu2O/In/Cu2O interfaces in optoelectronics as thin film transistors and electromagnetic wave cavities.
  • Article
    Citation - WoS: 5
    Citation - Scopus: 4
    Properties of Se/Inse Thin-Film Interface
    (Springer, 2016) Qasrawi, A. F.; Qasrawı, Atef Fayez Hasan; Kayed, T. S.; Elsayed, Khaled A.; Kayed, Tarek Said; Qasrawı, Atef Fayez Hasan; Kayed, Tarek Said; Department of Electrical & Electronics Engineering; Department of Electrical & Electronics Engineering
    Se, InSe, and Se/InSe thin films have been prepared by the physical vapor deposition technique at pressure of similar to 10(-5) torr. The structural, optical, and electrical properties of the films and Se/InSe interface were investigated by means of x-ray diffraction (XRD) analysis, ultraviolet-visible spectroscopy, and current-voltage (I-V) characteristics. XRD analysis indicated that the prepared InSe films were amorphous while the Se films were polycrystalline having hexagonal structure with unit cell parameters of a = 4.3544 and c = 4.9494 . Spectral reflectance and transmittance analysis showed that both Se and InSe films exhibited indirect allowed transitions with energy bandgaps of 1.92 eV and 1.34 eV, respectively. The Se/InSe interface exhibited two energy bandgaps of 0.98 eV and 1.73 eV above and below 2.2 eV, respectively. Dielectric constant values were also calculated from reflectance spectra for the three layers in the frequency range of 500 THz to 272 THz. The dielectric constant exhibited a promising feature suggesting use of the Se/InSe interface as an optical resonator. Moreover, the Au/Se/InSe/Ag heterojunction showed some rectifying properties that could be used in standard optoelectronic devices. The ideality factor and height of the energy barrier to charge carrier motion in this device were found to be 1.72 and 0.66 eV, respectively.
  • Article
    Citation - WoS: 3
    Citation - Scopus: 4
    In Situ Observation of Heat-Assisted Hexagonal-Orthorhombic Phase Transitions in Se/Ag Sandwiched Structures and Their Effects on Optical Properties
    (Springer, 2019) Qasrawi, A. F.; Aloushi, Hadil D.
    In this work, two selenium layers of 500-nm thickness, nano-sandwiched with Ag nanosheets of 100-nm thickness (Se/Ag/Se), are subjected to in situ monitoring of the structural and optical transitions during heating over a temperature range of 303-473 K by x-ray diffraction and ultraviolet-visible light spectrophotometry, respectively. The Se/Ag/Se thin films are observed to exhibit a transformation from an amorphous to a polycrystalline phase at 343 K. Increasing the temperature above 363 K enhances the crystallinity of the hexagonal phase, reduces the microstrain, increases the crystallite size and reduces the defect density. Accordingly, the optical absorption spectra are redshifted upon heating. The redshift is accompanied by a transition in the energy band gap from 2.03 eV to 1.85 eV as the material structural phase is transformed from amorphous to polycrystalline. Increasing the temperature causes the energy band gap to shrink. Another permanent phase transformation from hexagonal to orthorhombic is detected when the Se/Ag/Se system is allowed to cool. Scanning electron microscopy images show that the phase transformation converts the grains of Se/Ag/Se films from wire-shaped to nanotubes. The second phase transformation causes a blueshift in the absorption coefficient spectra and increases the energy band gap. The structural and optical parameter enhancements achieved via heating render the Se thin films more suitable for optoelectronic applications.