A mechanistic approach to investigate drilling of UD-CFRP laminates with PCD drills

Simple item page
dc.authoridKarpat, Yigit/0000-0002-3535-8120
dc.authorscopusid6504614044
dc.authorscopusid54965493700
dc.authorscopusid55258538900
dc.authorscopusid7003779929
dc.contributor.authorKarpat, Y.
dc.contributor.authorBahtiyar, O.
dc.contributor.authorDeger, B.
dc.contributor.authorKaftanoglu, Bilgin
dc.contributor.otherManufacturing Engineering
dc.date.accessioned2024-07-05T14:25:57Z
dc.date.available2024-07-05T14:25:57Z
dc.date.issued2014
dc.departmentAtılım Universityen_US
dc.department-temp[Karpat, Y.] Bilkent Univ, Dept Ind Engn, Ankara, Turkey; [Bahtiyar, O.; Deger, B.] TAI, Ankara, Turkey; [Kaftanoglu, Bilgin] Atilim Univ, Dept Mfg Engn, Ankara, Turkeyen_US
dc.descriptionKarpat, Yigit/0000-0002-3535-8120en_US
dc.description.abstractCarbon fiber reinforced plastics (CFRPs) possess desirable material properties that satisfy the aerospace industry's high strength to weight ratio objective. Therefore, CFRPs are commonly used in structural parts, either alone or together with aluminum and titanium alloys. Drilling of CFRPs has been studied extensively in the literature in recent years, with special emphasis on process parameters and delamination. This study identifies mechanical properties of uni-directional CFRPs through drilling tests. Drilling of uni-directional CFRP plates with and without pilot holes has been performed, and cutting and edge force coefficients are identified. A polycrystalline diamond (PCD) drill was used in tests since this type of drill is commonly used in practice. Finally, validation tests on multi directional CFRP laminates have been performed and good results have been obtained. (C) 2014 CIRP.en_US
dc.description.sponsorshipScientific and Technological Research Council of Turkey (Tubitak-Teydeb) [3090513]en_US
dc.description.sponsorshipThe authors would like to acknowledge financial support from the Scientific and Technological Research Council of Turkey (Tubitak-Teydeb 3090513).en_US
dc.identifier.citation59
dc.identifier.doi10.1016/j.cirp.2014.03.077
dc.identifier.endpage84en_US
dc.identifier.issn0007-8506
dc.identifier.issn1726-0604
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-84902536573
dc.identifier.startpage81en_US
dc.identifier.urihttps://doi.org/10.1016/j.cirp.2014.03.077
dc.identifier.urihttps://hdl.handle.net/20.500.14411/67
dc.identifier.volume63en_US
dc.identifier.wosWOS:000338811000021
dc.identifier.wosqualityQ2
dc.institutionauthorKaftanoğlu, Bilgin
dc.language.isoenen_US
dc.publisherElsevieren_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectMachiningen_US
dc.subjectDrillingen_US
dc.subjectFiber reinforced plasticen_US
dc.titleA mechanistic approach to investigate drilling of UD-CFRP laminates with PCD drillsen_US
dc.typeArticleen_US
dspace.entity.typePublication
relation.isAuthorOfPublication6a16f0d1-a867-4770-b8fd-9628467d1eb8
relation.isAuthorOfPublication.latestForDiscovery6a16f0d1-a867-4770-b8fd-9628467d1eb8
relation.isOrgUnitOfPublication9804a563-7f37-4a61-92b1-e24b3f0d8418
relation.isOrgUnitOfPublication.latestForDiscovery9804a563-7f37-4a61-92b1-e24b3f0d8418

Files

Collections

WOS
Scopus