Finite element analysis of non-isothermal warm deep drawing of dual phase steel

Simple item page
dc.authoridPepelnjak, Tomaz/0000-0002-4199-852X
dc.authorscopusid56045845000
dc.authorscopusid7003779929
dc.authorwosidPepelnjak, Tomaz/Q-7521-2018
dc.authorwosidPepelnjak, Tomaz/AAJ-2605-2021
dc.contributor.authorPepelnjak, T.
dc.contributor.authorKaftanoglu, B.
dc.contributor.otherManufacturing Engineering
dc.date.accessioned2024-07-05T14:30:32Z
dc.date.available2024-07-05T14:30:32Z
dc.date.issued2016
dc.departmentAtılım Universityen_US
dc.department-temp[Pepelnjak, T.] Univ Ljubljana, Fac Mech Engn, Forming Lab, Ljubljana, Slovenia; [Kaftanoglu, B.] ATILIM Univ, Dept Mfg Engn, Ankara, Turkey; [Kaftanoglu, B.] ATILIM Univ, Met Forming Ctr Excellence, Ankara, Turkeyen_US
dc.descriptionPepelnjak, Tomaz/0000-0002-4199-852Xen_US
dc.description.abstractImproving the formability of the material is an important issue in the deep drawing process. Heating the material above its recrystallization temperature drastically increases formability but in the case of dual phase (DP) steels it results in the loss of their mechanical properties. To improve the drawing ratio, only the heating of the flange region in the warm temperature range up to 300 degrees C was studied on DP600 sheet steel by numerical simulation. Thermo-elastic-plastic FEM analysis of deep drawing at several drawing ratios was performed and compared with experimental results.en_US
dc.description.sponsorshipScientific and Technological Research Council of Turkey (TUBITAK); Slovenia (ARRS) [111M448]; ATILIM University [ATU-BAP-1011-13]en_US
dc.description.sponsorshipThe authors would like to acknowledge the financial support received from The Scientific and Technological Research Council of Turkey (TUBITAK) and Slovenia (ARRS) under Project No: 111M448 and from ATILIM University under the project No: ATU-BAP-1011-13. The use of facilities in the Metal Forming Center of Excellence at ATILIM University as well as Faculty of Natural Sciences and Engineering, University of Ljubljana is also acknowledged and thanks are extended to the personnel for their contributions on the material tests and the use of HPC.en_US
dc.identifier.citation1
dc.identifier.doi10.1051/matecconf/20168014003
dc.identifier.issn2261-236X
dc.identifier.scopus2-s2.0-85016130760
dc.identifier.urihttps://doi.org/10.1051/matecconf/20168014003
dc.identifier.urihttps://hdl.handle.net/20.500.14411/566
dc.identifier.volume80en_US
dc.identifier.wosWOS:000392331100079
dc.institutionauthorKaftanoğlu, Bilgin
dc.language.isoenen_US
dc.publisherE D P Sciencesen_US
dc.relation.ispartof12th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM) -- JUL 04-07, 2016 -- Univ Technol Troyes, Troyes, FRANCEen_US
dc.relation.ispartofseriesMATEC Web of Conferences
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subject[No Keyword Available]en_US
dc.titleFinite element analysis of non-isothermal warm deep drawing of dual phase steelen_US
dc.typeConference Objecten_US
dspace.entity.typePublication
relation.isAuthorOfPublication6a16f0d1-a867-4770-b8fd-9628467d1eb8
relation.isAuthorOfPublication.latestForDiscovery6a16f0d1-a867-4770-b8fd-9628467d1eb8
relation.isOrgUnitOfPublication9804a563-7f37-4a61-92b1-e24b3f0d8418
relation.isOrgUnitOfPublication.latestForDiscovery9804a563-7f37-4a61-92b1-e24b3f0d8418

Files

Collections

WOS
Scopus