Güllü, Hasan Hüseyin
Loading...
Profile URL
Name Variants
Gullu,H.H.
H.,Güllü
H.H.Güllü
G., Hasan Huseyin
Güllü, Hasan Hüseyin
H., Gullu
G.,Hasan Huseyin
H.H.Gullu
Hasan Hüseyin, Güllü
G.,Hasan Hüseyin
Hasan Huseyin, Gullu
Gullu, Hasan Huseyin
Güllü,H.H.
Gullu, H. H.
Gullu, Hasan H.
H.,Güllü
H.H.Güllü
G., Hasan Huseyin
Güllü, Hasan Hüseyin
H., Gullu
G.,Hasan Huseyin
H.H.Gullu
Hasan Hüseyin, Güllü
G.,Hasan Hüseyin
Hasan Huseyin, Gullu
Gullu, Hasan Huseyin
Güllü,H.H.
Gullu, H. H.
Gullu, Hasan H.
Job Title
Doktor Öğretim Üyesi
Email Address
hasan.gullu@atilim.edu.tr
Main Affiliation
Department of Electrical & Electronics Engineering
Status
Former Staff
Website
ORCID ID
Scopus Author ID
Turkish CoHE Profile ID
Google Scholar ID
WoS Researcher ID
Sustainable Development Goals
2
ZERO HUNGER
0
Research Products
14
LIFE BELOW WATER
0
Research Products
17
PARTNERSHIPS FOR THE GOALS
0
Research Products
5
GENDER EQUALITY
0
Research Products
16
PEACE, JUSTICE AND STRONG INSTITUTIONS
0
Research Products
8
DECENT WORK AND ECONOMIC GROWTH
0
Research Products
4
QUALITY EDUCATION
0
Research Products
6
CLEAN WATER AND SANITATION
0
Research Products
7
AFFORDABLE AND CLEAN ENERGY
5
Research Products
10
REDUCED INEQUALITIES
0
Research Products
11
SUSTAINABLE CITIES AND COMMUNITIES
0
Research Products
9
INDUSTRY, INNOVATION AND INFRASTRUCTURE
0
Research Products
1
NO POVERTY
0
Research Products
3
GOOD HEALTH AND WELL-BEING
0
Research Products
12
RESPONSIBLE CONSUMPTION AND PRODUCTION
0
Research Products
13
CLIMATE ACTION
0
Research Products
15
LIFE ON LAND
0
Research Products
This researcher does not have a Scopus ID.
This researcher does not have a WoS ID.
Scholarly Output
55
Articles
52
Views / Downloads
7/0
Supervised MSc Theses
1
Supervised PhD Theses
0
WoS Citation Count
877
Scopus Citation Count
899
WoS h-index
16
Scopus h-index
16
Patents
0
Projects
0
WoS Citations per Publication
15.95
Scopus Citations per Publication
16.35
Open Access Source
8
Supervised Theses
1
Google Analytics Visitor Traffic
| Journal | Count |
|---|---|
| Journal of Materials Science: Materials in Electronics | 16 |
| Physica B: Condensed Matter | 7 |
| Bulletin of Materials Science | 3 |
| Materials Science in Semiconductor Processing | 3 |
| Optik | 3 |
Current Page: 1 / 5
Scopus Quartile Distribution
Competency Cloud
54 results
Scholarly Output Search Results
Now showing 1 - 10 of 54
Article Deposition and Characterization of Znsnse2 Thin-Films Deposited by Using Sintered Stoichiometric Powder(2019) Sürücü, Özge Bayraklı; Güllü, Hasan HüseyinIn this work, ZnSnSe2 (ZTSe) thin films were deposited using crystalline powder grown by vertical Bridgman-Stockbarger technique. The deposition process was carried out by means of e-beam evaporation on the well-cleaned soda lime glass substrates and keeping them at the substrate temperature of 200°C. The structural, optical and electrical properties of ternary ZTSe thin films were investigated depending on the annealing temperature at 250 and 300°C. X-ray diffraction analysis showed that as-grown films were in amorphous structure, however annealing at 250°C triggered the crystallization on the preferred ternary structure and annealing at 300°C resulted in the changes from amorphous to the polycrystalline structure. Using the compositional analysis, the detail information about the stoichiometry and the segregation mechanisms of the constituent elements in the structure were determined for both as-grown and annealed samples. In addition, they were morphologically characterized using scanning electron microscopy technique. The electrical properties were analyzed using temperature dependent dark- and photo-conductivity measurements. From the variation of electrical conductivity as a function of the ambient temperature, the current transport mechanisms and corresponding activation energies at specific temperature intervals for each sample were determined. The optical properties for the ZTSe thin films were studied depending on the structural changes with annealing.Article Citation - WoS: 146Citation - Scopus: 147CaXH3 (X = Mn, Fe, Co) perovskite-type hydrides for hydrogen storage applications(Wiley, 2020) Surucu, Gokhan; Gencer, Aysenur; Candan, Abdullah; Gullu, Hasan H.; Isik, MehmetHydrogen storage is one of the attractive research interests in recent years due to the advantages of hydrogen to be used as energy source. The studies on hydrogen storage applications focus mainly on investigation of hydrogen storage capabilities of newly introduced compounds. The present paper aims at characterization of CaXH3 (X: Mn, Fe, or Co) perovskite-type hydrides for the first time to understand their potential contribution to the hydrogen storage applications. CaXH3 compounds have been investigated by density functional theory studies to reveal their various characteristics and hydrogen storage properties. CaXH3 compounds have been optimized in cubic crystal structure and the lattice constants of studied compounds have been obtained as 3.60, 3.50, and 3.48 angstrom for X: Mn, Fe, and Co compounds, respectively. The optimized structures have negative formation enthalpies pointing out that studied compounds are thermodynamically stable and could be synthesized experimentally. The gravimetric hydrogen storage densities of X: Mn, Fe, and Co compounds were found in as 3.09, 3.06, and 2.97 wt%, respectively. The revealed values for hydrogen storage densities indicate that CaXH3 compounds may be potential candidates for hydrogen storage applications. Moreover, various mechanical parameters of interest compounds like elastic constants, bulk modulus, and Poisson's ratio have been reported throughout the study. These compounds were found mechanically stable with satisfying Born stability criteria. Further analyses based on Cauchy pressure and Pugh criterion, showed that they have brittleness nature and relatively hard materials. In addition, the electronic characteristics, band structures, and associated partial density of states of CaXH3 hydrides have been revealed. The dynamic stability behavior of them was verified based on the phonon dispersion curves.Article Citation - WoS: 22Citation - Scopus: 24Synthesis and Temperature-Tuned Band Gap Characteristics of Magnetron Sputtered Znte Thin Films(Elsevier, 2020) Isik, M.; Gullu, H. H.; Parlak, M.; Gasanly, N. M.Zinc telluride (ZnTe) is one of the attractive semiconducting compounds used in various optoelectronic devices. The usage of ZnTe in optoelectronic applications directs researchers to search its optical characteristics in great detail. For this purpose, structural and optical properties of magnetron sputtered ZnTe thin films were studied by means of x-ray diffraction and transmission spectroscopy measurements. Structural analyses indicated that ZnTe thin films having cubic crystalline structure were successfully grown on soda-lime glass substrates. Transmittance spectra in the 400-1000 nm were recorded in between 10 and 300 K temperature region. The analyses of absorption coefficient spectra resulted in band gap energies decreasing from around 2.31 (10 K) to 2.26 eV (300 K). Temperature dependency of gap energy was studied by Varshni and O'Donnell-Chen relations to determine various optical parameters like absolute zero temperature band gap energy, change of gap energy with temperature, phonon energy.Article Citation - WoS: 6Citation - Scopus: 7Construction of Self-Assembled Vertical Nanoflakes on Cztsse Thin Films(Iop Publishing Ltd, 2019) Terlemezoglu, M.; Surucu, O. Bayrakli; Colakoglu, T.; Abak, M. K.; Gullu, H. H.; Ercelebi, C.; Parlak, M.Cu2ZnSn(S, Se)(4) (CZTSSe) is a promising alternative absorber material to achieve high power conversion efficiencies, besides its property of involving low-cost and earth-abundant elements when compared to Cu(In, Ga) Se-2 (CIGS) and cadmium telluride (CdTe), to be used in solar cell technology. In this study, a novel fabrication technique was developed by utilizing RF sputtering deposition of CZTSSe thin films having a surface decorated with self-assembled nanoflakes. The formation of nanoflakes was investigated by detailed spectroscopic method of analysis in the effect of each stacked layer deposition in an optimized sequence and the size of nanoflakes by an accurate control of sputtering process including film thickness. Moreover, the effects of substrate temperature on the formation of nanoflakes on the film surface were discussed at a fixed deposition route. One of the main advantages arising from the film surface with self-assembled nanoflakes is the efficient light trapping which decreases the surface reflectance. As a result of the detailed production and characterization studies, it was observed that there was a possibility of repeatable and controllable fabrication sequence for the preparation of CZTSSe thin films with self-textured surfaces yielding low surface reflectance.Article Citation - WoS: 2Citation - Scopus: 3Electrical Characterization of Zninse2 Thin-Film Heterojunction(Springer, 2019) Gullu, H. H.; Parlak, M.ZnInSe2/Cu0.5Ag0.5InSe2 diode structures have been fabricated by thermal evaporation of stacked layers on indium tin oxide-coated glass substrates. Temperature-dependent dark current-voltage measurements were carried out to extract the diode parameters and to determine the dominant conduction mechanisms in the forward- and reverse-bias regions. The heterostructure showed three order of magnitude rectifying behavior with a barrier height of 0.72 eV and ideality factor of 2.16 at room temperature. In the high forward-bias region, the series and shunt resistances were calculated with the help of parasitic resistance relations, yielding room-temperature values of 9.54 x 10(2) Omega cm(2) and 1.23 x 10(3) Omega cm(2), respectively. According to the analysis of the current flow in the forward-bias region, abnormal thermionic emission due to the variation of the ideality factor with temperature and space-charge-limited current processes were determined to be the dominant conduction mechanisms in this heterostructure. In the reverse-bias region, the tunneling mechanism was found to be effective in the leakage current flow with trap density of 10(6) cm(-3). Spectral photocurrent measurements were carried out to investigate the spectral working range of the device structure. The main photocurrent peaks observed in the spectrum corresponded to the band-edge values of the active thin-film layers.Article Citation - WoS: 1Citation - Scopus: 1Structural and Optical Properties of Thermally Evaporated Ga-In Thin Films(World Scientific Publ Co Pte Ltd, 2014) Isik, Mehmet; Gullu, Hasan HuseyinIn this paper, structural and optical properties of Ga-In-Se (GIS) thin films deposited by thermal evaporation technique have been investigated. The effect of annealing was also studied for samples annealed at temperatures between 300 degrees C and 500 degrees C. X-ray diffraction, energy dispersive X-ray analysis and scanning electron microscopy have been used for structural characterization. It was reported that increase of annealing temperature results with better crystallization and chemical composition of the films were almost same. Optical properties of the films were studied by transmission measurements in the wavelength range of 320-1100 nm. The direct bandgap transitions with energies in the range of 1.52 eV and 1.65 eV were revealed for the investigated GIS films. Photon energy dependence of absorption coefficient showed that there exist three distinct transition regions for films annealed at 400 degrees C and 500 degrees C. The quasicubic model was applied for these transitions to calculate crystal-field splitting and spin-orbit splitting energy values.Article Citation - WoS: 77Citation - Scopus: 79Electrical Properties of Al/Pcbm:zno Heterojunction for Photodiode Application(Elsevier Science Sa, 2020) Gullu, H. H.; Yildiz, D. E.; Kocyigit, A.; Yildirim, M.In this paper, the electrical characteristics of spin-coated PCBM:ZnO interlayered Al/PCBM:ZnO/Si diode are investigated under the aim of photodiode application. Under dark condition, the diode shows about four orders in magnitude rectification rate and diode illumination results in efficient rectification with increase in intensity. The analysis of current-voltage curve results a non-ideal diode characteristics according to the thermionic emission model due to the existence of parasitic resistances and interface states. The measured current-voltage values are used to extract the barrier height and ideality factor under dark and illumination conditions. Under illumination, photo-generated carriers contribute to the current flow and linear photo-conductivity behavior in photo-current measurements with illumination shows the possible use of hybrid PCBM:ZnO layer in Si-based photodiodes. In addition, change in the series and shunt resistance values under illumination is found to be effective in this light-sensing behavior of the diode. This characteristic is also observed from the typical on/off illumination switching behavior for the photodiodes in transient photo-current, photo-capacitance and photo-conductance measurements with the quick response to the illumination. The deviations from ideality are also discussed by means of distribution of interface states and series resistance depending on the applied frequency and bias voltage. (C) 2020 Elsevier B.V. All rights reserved.Article Citation - WoS: 42Citation - Scopus: 41Analysis of Forward and Reverse Biased Current-Voltage Characteristics of Al/Al2< Schottky Diode With Atomic Layer Deposited Al2o3< Thin Film Interlayer(Springer, 2019) Gullu, H. H.; Yildiz, D. E.The dark current-voltage (I-V) characteristics of Al/Al2O3/n-Si Schottky diode are investigated in a wide temperature range of 260-360 K. The diode shows four orders of magnitude rectification. In forward and reverse bias regions, the temperature-dependent I-Vcharacteristics are detailed in terms of diode parameters and dominant conduction mechanisms. Due to the existence of Al2O3 film layer and series resistance in the diode structure, current flow under the forward bias is observed in a deviation from pure exponential characteristics. The diode parameters are estimated from thermionic emission model with non-unity ideality factor, and this non-ideal behavior is resulted in the ideality factors greater than two. In addition to these values, zero-bias barrier height is found to be strongly temperature dependent, and this variation indicates a presence of inhomogeneties in the barrier according to Gaussian distribution (GD) approximation. This fact is investigated plotting characteristic plot of this model and by extracting mean barrier height with its standard deviation. In order to complete the work on the forward I-V region, the carrier transport characteristics of the diode are explained on the basis of thermionic emission mechanism with a GD of the harrier heights. In accordance with this approximation, the conventional Richardson plot exhibits non-linearity behavior and modified current relation based on GD model is used to calculate mean barrier height and Richardson constant. In addition, the values of parasitic resistances are determined using Ohm's law as a function of temperature for all bias voltage spectra. In the reverse bias region, Poole-Frenkel effect is found to be dominant on the conduction associated with the barrier lowering, and barrier height in the emission process from the trapped states, and high-frequency dielectric constant of Al2O3 film layer is calculated.Article Citation - WoS: 2Citation - Scopus: 1Investigation of Conductivity Characteristics of Zn-In Thin Films(World Scientific Publ Co Pte Ltd, 2020) Gullu, H. H.; Parlak, M.Zn-In-Se thin films were fabricated on the ultrasonically cleaned glass substrates masked with clover-shaped geometry by thermal evaporation of its elemental sources. Temperature-dependent conductivity characteristics of the films were investigated under dark and illuminated conditions. The semiconductor type of the films was found as n-type by thermal probe test. According to the van der Pauw technique, the dark electrical conductivity analyses showed that the variations of conductivity of unannealed and annealed at 300 degrees C samples are in exponential dependence of temperature. These conductivity profiles were found to be dominated by the thermionic emission at high temperature region whereas their behaviors at low temperatures were modeled by hopping theory. On the contrary, as a result of the further annealing temperatures, the surface of the samples showed semi-metallic characteristics with deviating from expected Arrhenius behavior. In addition, the temperature-dependent photoconductivity of the films was analyzed under different illumination intensities and the results were explained by the supra-linear characteristic based on the two-center recombination model.Article Citation - WoS: 25Citation - Scopus: 25First Principles Study on the Structural, Electronic, Mechanical and Lattice Dynamical Properties of Xrhsb (x = Ti and Zr) Paramagnet Half-Heusler Antimonides(Iop Publishing Ltd, 2019) Surucu, Gokhan; Candan, Abdullah; Erkisi, Aytac; Gencer, Aysenur; Gullu, Hasan HuseyinThe half-Heusler TiRhSb and ZrRhSb alloys in the formation of face-centered cubic MgAgAs-type structure, which conforms to the F (4) over bar 3m space group with 216 as the space number, have been investigated using Generalized Gradient Approximation (GGA) implemented in Density Functional Theory (DFT). The calculated formation enthalpies and the plotted energy-volume curves of different types of structural phases (alpha, beta, and gamma) in these alloys indicate that the gamma-phase structure is the best energetically suitable structure. In addition, TiRhSb and ZrRhSb alloys have been found as paramagnetic (PM) with the investigation of antiferromagnetic (AFM), ferromagnetic (FM), and paramagnetic (PM) orders in the most stable gamma-phase structure. Therefore, their electronic, mechanical, and dynamical properties have been examined in the gamma structural phase and paramagnetic order. These alloys have semiconducting nature due to the observed same band gaps in both the majority and minority spin channels of the calculated spin-polarised electronic band structure. These calculated band gaps are 0.75 eV for gamma-TiRhSb and 1.18 eV for gamma-ZrRhSb. The predicted elastic constants indicate that the alloys in this study are mechanically stable and show nearly isotropic behavior in the gamma structural phase. Also, the minimum and the diffuson thermal conductivites have been determined for these alloys. Finally, the calculated phonon dispersion spectras for the gamma-TiRhSb and gamma-ZrRhSb half-Heusler antimonide alloys show the dynamic stability of these systems.
