Browsing by Author "Basar, Ahmet Ozan"
Now showing 1 - 5 of 5
- Results Per Page
- Sort Options
Article Citation Count: 63Coaxial and emulsion electrospinning of extracted hyaluronic acid and keratin based nanofibers for wound healing applications(Pergamon-elsevier Science Ltd, 2021) Şaşmazel, Hilal Türkoğlu; Bedir, Tuba; Kalkandelen, Cevriye; Basar, Ahmet Ozan; Sasmazel, Hilal Turkoglu; Ustundag, Cem Bulent; Gunduz, Oguzhan; Metallurgical and Materials EngineeringNovel composites based on poly(epsilon-caprolactone)/polyethylene oxide loaded with hyaluronic acid(HA) and keratin(KR) were produced separately using emulsion and coaxial electrospinning methods. HA and KR were extracted from animal sources, characterized and loaded into coaxial fiber structures as bioactive agents, separately and together. Morphological, chemical, thermal, and mechanical characteristics of the fibers were investigated. According to the SEM results, diameters of smooth and beadless fibers fabricated via emulsion method were at nanoscale (sub-micron) while fibers of coaxial method were at micro scale. Benefitted electrospinning techniques demonstrated that hydrophobic and hydrophilic polymers can be advantageously combined. Core polymer specific FT-IR bands were not visible, their presence was proven with DSC analysis which confirms core-shell morphology of the fibers. In vitro studies exhibited spun mats did not have any cytotoxic effects and the HA and KR incorporated into the fiber structure synergistically increased cell viability and cell proliferation. This study demonstrated that the electrospun fibers containing HA and KR fabricated by both emulsion and coaxial methods can be efficient for wound healing applications.Article Citation Count: 9Development of Antibacterial Composite Electrospun Chitosan-Coated Polypropylene Materials(Amer Scientific Publishers, 2018) Şaşmazel, Hilal Türkoğlu; Basar, Ahmet Ozan; Sasmazel, Hilal Turkoglu; Metallurgical and Materials EngineeringIn this study, a natural antibacterial substance chitosan was coated with/without potassium sorbate (KS) (0.8% (w/w) of KS, 8% (w/v) chitosan) onto the polypropylene (PP) film by using electrospinning technique to obtain novel antibacterial composite materials for various applications such as wound dressing, tissue engineering, drug delivery and food packaging. Atmospheric pressure plasma surface treatment was applied onto polypropylene films in order to increase its wettability thus enhancing the adhesion capacity of the films and the optimum CA value was determined as 42.75 +/- 0.80 degrees. Scanning Electron Microscope (SEM) and X-ray Photoelectron Spectroscopy (XPS) analyses were realized to observe the morphological changes and chemical properties of the samples, respectively. Contact angle measurements, tensile testing, oxygen and water vapor transmission rate analyses were performed to obtain wettability values, mechanical properties and WVTRs, respectively. The WVTR was increased by plasma treatment and addition of KS (from 14.264 +/- 0.214% to 21.020 +/- 0.659%). The desired antibacterial performance of the samples was assessed with Staphylococcus aureus and Escherichia coli by inhibition ratio calculation and disc diffusion assay. The highest inhibition ratios were found as 64% for S. aureus and 92% for E. coli for plasma-treated CS-KS-PP films.Article Citation Count: 5A drug-eluting nanofibrous hyaluronic acid-keratin mat for diabetic wound dressing(Springernature, 2022) Şaşmazel, Hilal Türkoğlu; Bedir, Tuba; Kalkandelen, Cevriye; Sasmazel, Hilal Turkoglu; Basar, Ahmet Ozan; Chen, Jing; Gunduz, Oguzhan; Metallurgical and Materials EngineeringDiabetes mellitus is a chronic metabolic disease associated with long-term multisystem complications, among which are non-healing diabetic foot ulcers (DFUs). Electrospinning is a sophisticated technique for the preparation of polymeric nanofibers impregnated with drugs for wound healing, burns, and diabetic ulcers. This study describes the fabrication and characterization of a novel drug-eluting dressing made of core-shell structured hyaluronic acid (HA)-keratin (KR)-polyethylene oxide (PEO) and polycaprolactone (PCL) nanofibers to treat diabetic wounds. The core-shell nanofibers produced by the emulsion electrospinning technique provide loading of metformin hydrochloride (MH), HA, and KR in the core of nanofibers, which in return improves the sustained long term release of the drug and prolongs the bioactivity. Morphological and chemical properties of the fibers were examined by SEM, FTIR, and XRD studies. It was observed that the fibers which contain HA and KR showed thin fiber structure, greater swelling capacity, fast degradation and increased cumulative drug release amount than neat emulsion fibers due to the hydrophilic nature of HA and KR. MH showed a sustained release from all fiber samples over 20 days and followed the first-order and Higuchi model kinetics and Fickian diffusion mechanism according to kinetic analysis results. In vitro cell culture studies showed that the developed mats exhibited enhanced biocompatibility performance with HA and KR incorporation. The results show that HA and KR-based emulsion electrospun fiber mats are potentially useful new nanofiber-based biomaterials in their use as drug carriers to treat diabetic wounds.Article Citation Count: 1In vitro evaluation of tooth-colored yttria stabilized zirconia ceramics(Taylor & Francis Ltd, 2021) Park, Jongee; Basar, Ahmet Ozan; Şaşmazel, Hilal Türkoğlu; Park, Jongee; Ozturk, Abdullah; Metallurgical and Materials EngineeringEffects of MoCl3 and NiCl2, originally incorporated as coloring agent, on the cellular response of 3 mol% yttria stabilized zirconia (3Y-TZP) ceramics was investigated. MoCl3 and NiCl2-MoCl3 incorporated, tooth-colored 3Y-TZP ceramics were produced through cold isostatic pressing at 100 MPa followed by pressureless sintering at 1450 degrees C for 2 h. Aging was performed on the sintered ceramics using distilled water in a reactor at 134 degrees C at 2.3 bar pressure for 2 h. The phases developed during different stages of processing were identified by X-ray diffraction (XRD) analysis. In vitro cell culture studies were carried out using L929 fibroblast cell line. The cell viability and proliferation studies revealed that none of the specimens showed cytotoxicity with respect to coloring. Confocal laser scanning microscope (CLSM) analyses suggested that all of the specimens exhibited good in vitro cytocompatibility. Enhancement in cell attachment, adhesion, and proliferation was observed in all specimens via scanning electron microscope (SEM) analysis. Although the coloring process did not improve the proliferation performance of the aged specimens, the incorporation of transition metals enhanced the in vitro performance of 3Y-TZP ceramics.Article Citation Count: 16Preparation of electrospun PCL-based scaffolds by mono/multi-functionalized GO(Iop Publishing Ltd, 2019) Şaşmazel, Hilal Türkoğlu; Sadhu, Veera; Sasmazel, Hilal Turkoglu; Metallurgical and Materials EngineeringIn the present study, sythetic biodegradable polymer poly(epsilon-caprolactone) (PCL) and graphene oxide (GO) were combined together to prepare 3D, composite tissue scaffolds (PCL/GO scaffolds) by using electrospinning technique. Also, the influence of Gly-Arg-Gly-Asp-Ser-Pro (GRGDSP) and/or thiophene (Th) modified GO on the composite PCL/GO mats (PCL/GO, PCL/GO-GRGDSP, PCL/ GO-Th, PCL/GO-GRGDSP-Th) was further investigated. Characteristic examinations of the scaffolds were carried out by scanning electron microscope (SEM), contact angle (CA) measurements, x-ray photoelectron spectroscopy, TGA, electrical conductivity tests, phosphate buffer saline absorption and shrinkage tests and mechanical tests. All of the scaffolds were exhibited suitable bead free and uniform morphology according to SEM images. With the addition of GO, better hydrophilicity and a slight CA decrease (similar to 5 degrees) for the PCL/GO scaffolds were observed. Mechanical properties were reinforced drastically with the addition and well-dispersion of GO into PCL matrix. The incorporation of PCL and GO exhibited enhanced electrical conductivity and the highest value was found for PCL/GO-GRGDSP-Th (2%) as 15.06 mu S cm(-1). The MG-63 osteoblast cell culture studies (MTT assay, ALP activity, Alizarin-Red staining, fluorescence and SEM analyses) showed that PCL/GO-GRGDSP-Th (1%) scaffolds exhibited the highest biocompatibility performance (1.87 fold MTT absorbance value comparing with neat PCL) due to the advanced properties of GO and the biological interfaces.