4D Printing of Reusable Mechanical Metamaterial Energy Absorber, Experimental and Numerical Investigation
Loading...
Date
2025
Journal Title
Journal ISSN
Volume Title
Publisher
Iop Publishing Ltd
Open Access Color
OpenAIRE Downloads
OpenAIRE Views
Abstract
This study investigates the compression behavior, energy absorption, shape memory properties, and reusability of 4D-printed smart mechanical metamaterials. Four structural configurations, i.e. honeycomb, re-entrant, and two modified re-entrant designs were developed to assess microstructure effects. Samples were fabricated using Polylactic Acid (PLA), a widely used shape memory polymer (SMP) in 4D printing, and polyethylene terephthalate glycol (PETG), an emerging SMP with demonstrated shape memory performance in recent studies. Cold-programming-induced shape recovery was evaluated at room temperature, simulating real-world conditions. Finite element simulations of compression and shape memory cycles matched experimental results well. Auxetic samples with negative Poisson's ratios showed superior energy absorption. However, only PETG demonstrated sufficient reusability, while PLA proved unsuitable for reusable designs. The PETG-3 modified re-entrant structure exhibited the best performance, with high energy absorption, delayed densification onset, and shape recovery and reusability factors of 0.95 and 0.96, respectively. Findings highlight the importance of considering both shape recovery and reusability when designing smart structures to address industrial challenges.
Description
Keywords
4D Printing, Smart Structures, Shape Memory Polymers, Energy Absorption
Turkish CoHE Thesis Center URL
Fields of Science
Citation
WoS Q
N/A
Scopus Q
Q1
Source
Volume
34
Issue
6