Modelling and Analysis of Tool Deflections in Tailored Micro End Mills

Simple item page
dc.authorscopusid44361197300
dc.authorscopusid6504614044
dc.contributor.authorBavil Oliaei,S.N.
dc.contributor.authorKarpat,Y.
dc.date.accessioned2024-07-05T15:45:37Z
dc.date.available2024-07-05T15:45:37Z
dc.date.issued2019
dc.departmentAtılım Universityen_US
dc.department-tempBavil Oliaei S.N., Department of Mechanical Engineering, Atilim University, Incek, Ankara, 06836, Turkey; Karpat Y., Department of Industrial Engineering, Department of Mechanical Engineering, Bilkent University, Bilkent, Ankara, 06800, Turkeyen_US
dc.description.abstractThe deflection of micro end mills has a detrimental effect on surface quality of the machined micro components and adversely affects the achievable dimensional and geometrical tolerances. In this paper, the analysis and modelling of tool deflections of tailored micro end mills have been considered. The tool deflections are obtained using analytical models as well as finite element simulations and verified using a dedicated measurement setup, which uses a capacitive sensor with a nanometre resolution for static tool deflection measurements. The optimisation of the micro end mill geometry has been performed to determine optimum neck taper angle and transition radius of the single edge micro end mill to have minimum tool deflections. With the developed model, tool failure predictions for a given process parameter set can be performed and it can be used for better micro milling process planning. Copyright © 2019 Inderscience Enterprises Ltd.en_US
dc.description.sponsorshipTUBITAK, (110M660); Türkiye Bilimsel ve Teknolojik Araştirma Kurumu, TÜBITAKen_US
dc.identifier.citationcount5
dc.identifier.doi10.1504/IJMMS.2019.097843
dc.identifier.endpage37en_US
dc.identifier.issn1753-1039
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-85062044050
dc.identifier.scopusqualityQ3
dc.identifier.startpage20en_US
dc.identifier.urihttps://doi.org/10.1504/IJMMS.2019.097843
dc.identifier.urihttps://hdl.handle.net/20.500.14411/3942
dc.identifier.volume12en_US
dc.language.isoenen_US
dc.publisherInderscience Publishersen_US
dc.relation.ispartofInternational Journal of Mechatronics and Manufacturing Systemsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.scopus.citedbyCount5
dc.subjectMicromillingen_US
dc.subjectOptimisationen_US
dc.subjectTailored micro end millen_US
dc.subjectTool deflectionen_US
dc.subjectTool failureen_US
dc.titleModelling and Analysis of Tool Deflections in Tailored Micro End Millsen_US
dc.typeArticleen_US
dspace.entity.typePublication

Files

Collections

Scopus