Akış, Tolga

Profile Picture
Profile URL
https://hdl.handle.net/20.500.14411/6697
Name Variants
Akis T.
Akis,Tolga
Tolga, Akış
Akış,T.
Akis,T.
T., Akış
Akis, Tolga
Akış, Tolga
Tolga Akış
T., Akis
T.,Akış
Akış T.
T.,Akis
Akiş T.
A.,Tolga
A., Tolga
Tolga, Akis
Akis, T
Job Title
Profesör Doktor
Email Address
tolga.akis@atilim.edu.tr
Main Affiliation
Civil Engineering
Status
Website
ORCID ID
0000-0002-6754-4497
Scopus Author ID
55144319800
Turkish CoHE Profile ID
177192
Google Scholar ID
27HKOkIAAAAJ
WoS Researcher ID
P-6181-2014

Sustainable Development Goals

NO POVERTY1
NO POVERTY
0
Research Products
ZERO HUNGER2
ZERO HUNGER
0
Research Products
GOOD HEALTH AND WELL-BEING3
GOOD HEALTH AND WELL-BEING
1
Research Products
QUALITY EDUCATION4
QUALITY EDUCATION
0
Research Products
GENDER EQUALITY5
GENDER EQUALITY
0
Research Products
CLEAN WATER AND SANITATION6
CLEAN WATER AND SANITATION
0
Research Products
AFFORDABLE AND CLEAN ENERGY7
AFFORDABLE AND CLEAN ENERGY
0
Research Products
DECENT WORK AND ECONOMIC GROWTH8
DECENT WORK AND ECONOMIC GROWTH
0
Research Products
INDUSTRY, INNOVATION AND INFRASTRUCTURE9
INDUSTRY, INNOVATION AND INFRASTRUCTURE
0
Research Products
REDUCED INEQUALITIES10
REDUCED INEQUALITIES
0
Research Products
SUSTAINABLE CITIES AND COMMUNITIES11
SUSTAINABLE CITIES AND COMMUNITIES
6
Research Products
RESPONSIBLE CONSUMPTION AND PRODUCTION12
RESPONSIBLE CONSUMPTION AND PRODUCTION
2
Research Products
CLIMATE ACTION13
CLIMATE ACTION
0
Research Products
LIFE BELOW WATER14
LIFE BELOW WATER
0
Research Products
LIFE ON LAND15
LIFE ON LAND
0
Research Products
PEACE, JUSTICE AND STRONG INSTITUTIONS16
PEACE, JUSTICE AND STRONG INSTITUTIONS
0
Research Products
PARTNERSHIPS FOR THE GOALS17
PARTNERSHIPS FOR THE GOALS
0
Research Products
Documents

28

Citations

508

h-index

13

Go to Scopus profile
Documents

27

Citations

539

Go to WoS profile
Scholarly Output

53

Articles

34

Views / Downloads

256/2203

Supervised MSc Theses

16

Supervised PhD Theses

0

WoS Citation Count

539

Scopus Citation Count

651

Patents

0

Projects

0

WoS Citations per Publication

10.17

Scopus Citations per Publication

12.28

Open Access Source

10

Supervised Theses

16

JournalCount
Iranian Journal of Science and Technology, Transactions of Mechanical Engineering3
Acta Mechanica2
Journal of the Croatian Association of Civil Engineers2
Journal of the Faculty of Engineering and Architecture of Gazi University2
Mechanics Based Design of Structures and Machines2
Current Page: 1 / 6

Scopus Quartile Distribution

Competency Cloud

GCRIS Competency Cloud

Filters

Reset filters

Settings

Author: Akis, TolgaHas files: false

Scholarly Output Search Results

Now showing 1 - 10 of 16
  • Thumbnail Image
    Article
    Citation - WoS: 50
    Citation - Scopus: 55
    Plane Strain Analytical Solutions for a Functionally Graded Elastic-Plastic Pressurized Tube
    (Elsevier Sci Ltd, 2006) Eraslan, Ahmet N.; Akis, Tolga
    Plane strain analytical solutions to functionally graded elastic and elastic-plastic pressurized tube problems are obtained in the framework of small deformation theory. The modulus of elasticity and the uniaxial yield limit of the tube material are assumed to vary radially according to two parametric parabolic forms. The analytical plastic model is based on Tresca's yield criterion, its associated flow rule and ideally plastic material behaviour. Elastic, partially plastic and fully plastic stress states are investigated. It is shown that the elastoplastic response of the functionally graded pressurized tube is affected significantly by the material nonhomogeneity. Different modes of plasticization may take place unlike the homogeneous case. It is also shown mathematically that the nonhomogeneous elastoplastic solution presented here reduces to that of a homogeneous one by appropriate choice of the material parameters. (c) 2006 Elsevier Ltd. All rights reserved.
  • Thumbnail Image
    Article
    Citation - WoS: 33
    Citation - Scopus: 36
    Exact Solution of Rotating Fgm Shaft Problem in the Elastoplastic State of Stress
    (Springer, 2007) Akis, Tolga; Eraslan, Ahmet N.
    Plane strain analytical solutions to estimate purely elastic, partially plastic and fully plastic deformation behavior of rotating functionally graded (FGM) hollow shafts are presented. The modulus of elasticity of the shaft material is assumed to vary nonlinearly in the radial direction. Tresca's yield criterion and its associated flow rule are used to formulate three different plastic regions for an ideal plastic material. By considerina different material compositions as well as a wide range of bore radii, it is demonstrated in this article that both the elastic and the elastoplastic responses of a rotating FGM hollow shaft are affected significantly by the material nonhomogeneity.
  • Thumbnail Image
    Article
    Citation - WoS: 20
    Citation - Scopus: 20
    The Stress Response of Partially Plastic Rotating Fgm Hollow Shafts: Analytical Treatment for Axially Constrained Ends
    (Taylor & Francis inc, 2006) Eraslan, Ahmet N.; Akis, Tolga
    analytical solutions to estimating the elastoplastic response of rotating functionally graded (FGM) hollow shafts with fixed ends are presented. The modulus of elasticity, as well as the uniaxial yield limit of the shaft material, are assumed to vary nonlinearly in the radial direction. The plastic model is based on Tresca's yield criterion, its associated flow rule, and ideal plastic material behaviour. Elastic, partially plastic, fully plastic, and residual stress states are investigated. It is shown that the elastoplastic stress response of a rotating FGM hollow shaft is affected significantly by the nonhomogeneity of the material. Unlike the case of a homogeneous hollow shaft, plastic deformation may commence at the inner surface, at the outer surface, or simultaneously at both surfaces. Accordingly, each case requires different mathematical treatment to arrive at its partially plastic solution. It is also shown that, by taking a numerical limit, the complete FGM solution presented herein converge to the solution of a homogeneous rotating shaft.
  • Thumbnail Image
    Article
    Citation - WoS: 3
    On the Yielding of Two-Layer Composite Spherical Pressure Vessels
    (Gazi Univ, 2017) Akis, Tolga
    The yielding of two-layer composite spherical pressure vessels under either internal or external pressure is investigated analytically in the framework of small deformations and von Mises yield criterion. It is shown for both pressure cases that depending on the material properties and sphere dimensions, different modes of plasticization may take place. Unlike the deformation behavior of a single layer spherical pressure vessel, yielding may commence at the inner layer or at the outer layer or simultaneously at both layers of the assembly.
  • Thumbnail Image
    Letter
    Amendments on "application of Mises Yield Criterion To Rotating Solid Disk Problem" by N. Aleksandrova [int. J. Eng. Sci. 51 (2012) 333-337]
    (Pergamon-elsevier Science Ltd, 2012) Eraslan, Ahmet N.; Akis, Tolga
    [No Abstract Available]
  • Thumbnail Image
    Article
    Citation - WoS: 10
    Citation - Scopus: 10
    Evaluation of Masonry Buildings and Mosques After Sivrice Earthquake
    (Croatian Soc Civil Engineers-hsgi, 2021) Mertol, Halit Cenan; Tunc, Gokhan; Akis, Tolga
    The evaluation of masonry and mosque type structures after the Sivrice Earthquake is presented in this study. Stone masonry buildings exhibited damage such as vertical cracks and splitting at corners, wedge shaped corner failures, diagonal cracking on walls, out-of-plane splitting of walls, and separation of walls from flooring/roofing systems. On the other hand, the separation of flags and caps of minarets was a common example of damage in mosques. Future earthquake damage can be prevented by following design codes and providing adequate supervision for new structures, while strengthening measures are recommended for the existing buildings.
  • Thumbnail Image
    Article
    Citation - WoS: 11
    Citation - Scopus: 13
    Automated Selection of Optimal Material for Pressurized Multi-Layer Composite Tubes Based on an Evolutionary Approach
    (Springer London Ltd, 2018) Azad, Saeid Kazemzadeh; Akis, Tolga; Kazemzadeh Azad, Saeid
    Decision making on the configuration of material layers as well as thickness of each layer in composite assemblies has long been recognized as an optimization problem. Today, on the one hand, abundance of industrial alloys with different material properties and costs facilitates fabrication of more economical or light weight assemblies. On the other hand, in the design stage, availability of different alternative materials apparently increases the complexity of the design optimization problem and arises the need for efficient optimization techniques. In the present study, the well-known big bang-big crunch optimization algorithm is reformulated for optimum design of internally pressurized tightly fitted multi-layer composite tubes with axially constrained ends. An automated material selection and thickness optimization approach is employed for both weight and cost minimization of one-, two-, and three-layer tubes, and the obtained results are compared. The numerical results indicate the efficiency of the proposed approach in practical optimum design of multi-layer composite tubes under internal pressure and quantify the optimality of different composite assemblies compared to one-layer tubes.
  • Thumbnail Image
    Letter
  • Thumbnail Image
    Article
    Citation - WoS: 2
    Citation - Scopus: 2
    Structural Design Optimization of Multi-Layer Spherical Pressure Vessels: a Metaheuristic Approach
    (Springer, 2019) Akis, Tolga; Azad, Saeid Kazemzadeh; Kazemzadeh Azad, Saeid
    This study addresses the optimum design problem of multi-layer spherical pressure vessels based on von Mises yield criterion. In order to compute the structural responses under internal pressure, analytical solutions for one-, two-, and three-layer spherical pressure vessels are provided. A population-based metaheuristic algorithm is reformulated for optimum material selection as well as thickness optimization of multi-layer spherical pressure vessels. Furthermore, in order to enhance the computational efficiency of the optimization algorithm, upper bound strategy is also integrated with the algorithm for reducing the total number of structural response evaluations during the optimization iterations. The performance of the algorithm is investigated through weight and cost minimization of one-, two- and three-layer spherical pressure vessels and the results are presented in detail. The obtained numerical results, based on different internal pressures as well as vessel sizes, indicate the usefulness and efficiency of the employed methodology in optimum design of multi-layer spherical pressure vessels.
  • Thumbnail Image
    Article
    Citation - WoS: 2
    Yielding of Radially Pressurized Functionally Graded Long Tubes Based on Von Mises Criterion
    (Gazi Univ, 2015) Akis, Tolga; Eren, Omur
    The elastic behaviour of functionally graded long tubes with axially constrained ends subject to either internal or external pressure is investigated analytically. The modulus of elasticity and the yield limit of the tube material are assumed to vary radially in nonlinear forms. Making use of von Mises yield criterion, the effect of grading parameters on the yielding behavior of the tube is investigated and it is observed that for both pressure cases, the plastic flow may commence at the inner surface, at the outer surface or simultaneously at both surfaces depending on the functionally grading parameters.