Browsing by Author "Balci, Burcu"

Now showing 1 - 4 of 4

Citation - WoS: 15
Citation - Scopus: 15
Electrochemical and Optical Characterization of a Multielectrochromic Copolymer Based on 3,4-Ethylenedioxythiophene and Functionalized Dithienylpyrrole Derivative
(Pergamon-elsevier Science Ltd, 2019) Tutuncu, Esra; Ozkut, Merve Icli; Balci, Burcu; Berk, Hasan; Cihaner, Atilla; Chemical Engineering
A novel conjugated copolymer, namely poly(3,4-ethylenedioxythiophene-co-1-(3,5-bis(trifluoromethyl)phenyl)-2,5-di(thiophen-2-yl)-1H-pyrrole) (P(EDOT-co-1)) was synthesized via electropolymerization method from a mixture of 3,4-ethylenedioxythiophene and 1-(3,5-bis(trifluoromethyl)phenyl)-2,5-di(thiophen-2-yl)-1H-pyrrole comonomers. The corresponding copolymer has an optical band gap of 1.7 eV and 41% optical contrast at 525 nm with a coloration efficiency of 258 cm(2)/C and 1.4 s switching time. The copolymer has a multi-electrochromic behavior: It has dark purple, purple, gray, green and cyan colors at different oxidation states. Electrochemical stability of P(EDOT-co-1) copolymer was also investigated and it was observed that the copolymer retained 86% of its stability under ambient conditions in the presence of oxygen (without purging the electrolyte solution with any inert gas) according to the current density and 83% according to the deposited charge even after 1000 redox cycles.
Citation - WoS: 27
Citation - Scopus: 27
Functionalized Polysulfide Copolymers With 4-Vinylpyridine Via Inverse Vulcanization
(Elsevier Science Bv, 2019) Berk, Hasan; Balci, Burcu; Ertan, Salih; Kaya, Murat; Cihaner, Atilla; Chemical Engineering
A new series of functional polysulfide copolymers called poly(sulfur-random-4-vinylpyridine) (poly(S-r-4VP)) was synthesized via inverse vulcanization technique by ring opening polymerization of elemental sulfur in the presence of 4-vinylpyridine (4VP). The corresponding copolymers can be post functionalized by using amine group in 4VP unit to get polymers bearing various properties. Elemental sulfur was heated up to 160 degrees C and 4VP was added slowly to a clear yellowish orange colored liquid at this temperature. The reaction mixture was vitrified to form a reddish-brown polymeric material at 180 degrees C in 1 h. The products were characterized by using FTIR, NMR, and Raman spectroscopic techniques. Poly(S-r-4VP) copolymers are soluble in common solvents like dichloromethane, chloroform and tetrahydrofuran. Weight-average molecular weights of poly(S-r-4VP) copolymers with different wt% 4VP were measured by using gel permeation chromatography technique. The polysulfide copolymers with different wt% 4VP have high weight-average molecular weights with polydispersity indeces (PDI) in a range from 1.88 to 4.06 measured by gel permeation chromatography. Post functionalization of the copolymer with 50 wt% 4VP as an example was performed successfully by using alkyl bromide to get N-alkyl quaternized 4VP in polymer backbone.
Synthesis and Characterization of a Luminol Based Chemiluminescent Trimeric System
(Springer/plenum Publishers, 2023) Kesimal, Busra; Balci, Burcu; Cakal, Deniz; Onal, Ahmet M.; Cihaner, Atilla; Chemical Engineering
A luminol based chemiluminescent trimeric system, namely 2,3-dihydro-5,8-di(thiophen-2-yl)phthalazine-1,4-dione (T2B-Lum), bearing thiophene rings as donor units and 2,3-dihydrophthalazine-1,4-dione as an acceptor unit was synthesized in two steps via donor-acceptor-donor approach using two different methods. It was found that T2B-Lum emits chemiluminescent light when exposed to H2O2 in a basic medium, and the presence of substituents and the type of aromatic ring bearing chemiluminescent active group have a direct effect on the compound's sensitivity. Among the members of a large family of metal ions, fluorescent and chemiluminescent T2B-Lum exhibited high sensitivity to Cu2+ and Fe3+ ions. Except for other metal cations (silver(I), cadmium(II), cobalt(II), iron(III), lithium(I), magnesium(II), manganese(II), nickel(II), zinc(II)), it has been observed that T2B-Lum is mostly sensitive to copper(II) ions with a detection limit value of 2.2 x 10(- 3) M. On the other hand, T2B-Lum was also found to exhibit a high sensitivity to extremely dilute aqueous solutions (e.g., 1:50.000 dilution) of blood samples, making it a promising candidate for use in forensic applications.
Synthesis and Electropolymerization of a Selenophene Based Chemiluminescent Monomer and Its Use in Blood Detection
(Elsevier Sci Ltd, 2025) Balci, Burcu; Cakal, Deniz; Cihaner, Atilla; Chemical Engineering
A new selenophene based trimeric chemiluminescent compound, namely 5,7-di(selenophen-2-yl)-2,3-dihydrothieno[3,4-d]pyridazine-1,4-dione (S2T-Lum), was synthesized in two steps via electron donor-acceptor-donor approach. Its chemiluminescent reaction with hydrogen peroxide was investigated in an alkaline solution in the presence of various catalysts such as different metal ions, hemin and blood samples and the results were compared with its thiophene analogue (T2T-Lum) and luminol. It was found that S2T-Lum was very sensitive to copper(II) and iron(III) ions, and blood samples. Also, it can be easily concluded that S2T-Lum as a new member of luminol type compounds is a potential candidate for the detection of blood findings in forensic science. Furthermore, S2T-Lum has an irreversible oxidation peak at 1.28 V vs Ag/AgCl, which is responsible from its electropolymerization. S2T-Lum was successfully polymerized electrochemically via potentiodynamic electrolysis without cleavage of its chemiluminescent active appendage. To the best of our knowledge, its corresponding polymer PS2T-Lum film is the first member of selenophene based luminol type electroactive polymers.