Browsing by Author "Gulcan, Mehmet"

Now showing 1 - 4 of 4

Citation Count: 32
Hydroxyapatite-Nanosphere Supported Ruthenium(0) Nanoparticle Catalyst for Hydrogen Generation From Ammonia-Borane Solution: Kinetic Studies for Nanoparticle Formation and Hydrogen Evolution
(Royal Soc Chemistry, 2014) Durak, Halil; Kaya, Murat; Gulcan, Mehmet; Zahmakiran, Mehmet; Ozkar, Saim; Kaya, Murat; Chemical Engineering
The development of readily prepared effective heterogeneous catalysts for hydrogen generation from ammonia-borane (AB; NH3BH3) solution under mild conditions still remains a challenge in the field of "hydrogen economy". In this study, we report our finding of an in situ generated, highly active ruthenium nanocatalyst for the dehydrogenation of ammonia-borane in water at room temperature. The new catalyst system consists of ruthenium(0) nanoparticles supported on nanohydroxyapatite (RuNPs@nano-HAp), and can be reproducibly prepared under in situ conditions from the ammonia-borane reduction of Ru3+ ions exchanged into nanohydroxyapatite (Ru3+@nano-HAp) during the hydrolytic dehydrogenation of ammonia-borane at 25 +/- 0.1 degrees C. Nanohydroxyapatite-supported ruthenium(0) nanoparticles were characterized by a combination of advanced analytical techniques. The sum of their results shows the formation of well-dispersed ruthenium(0) nanoparticles with a mean diameter of 2.6 +/- 0.6 nm on the surface of the nanospheres of hydroxyapatite by keeping the host matrix intact. The resulting RuNPs@nano-HAp are highly active catalyst in the hydrolytic dehydrogenation of ammonia-borane with an initial TOF value of 205 min(-1) by generating 3.0 equiv. of H-2 per mole of ammonia-borane at 25 +/- 0.1 degrees C. Moreover, they are sufficiently stable to be isolated and bottled as solid materials, which can be reused as active catalyst under the identical conditions of first run. The work reported here also includes the following results: (i) monitoring the formation kinetics of the in situ generated RuNPs@nano-HAp by hydrogen generation from the hydrolytic dehydrogenation of ammonia-borane as the reporter reaction. The sigmoidal kinetics of catalyst formation and concomitant dehydrogenation fits well to the two-step, slow nucleation, followed by autocatalytic surface growth mechanism, P -> Q (rate constant k(1)) and P + Q -> 2Q (rate constant k(2)), in which P is Ru3+@nano-HAp and Q is the growing, catalytically active RuNPs@nano-HAp; (ii) the compilation of kinetic data for the RuNPs@nano-HAp catalyzed hydrolytic dehydrogenation of ammonia-borane depending on the temperature and catalyst concentration to determine the dependency of reaction rate on catalyst concentration and activation parameters (E-a, Delta H-#, and Delta S-#) of the reaction.
Citation Count: 23
Palladium(0) Nanoparticles Supported on Hydroxyapatite Nanospheres: Active, Long-Lived, and Reusable Nanocatalyst for Hydrogen Generation From the Dehydrogenation of Aqueous Ammonia-Borane Solution
(Springer, 2014) Karatas, Yasar; Kaya, Murat; Yurderi, Mehmet; Gulcan, Mehmet; Zahmakiran, Mehmet; Kaya, Murat; Chemical Engineering
Among the solidmaterials considered in the chemical hydrogen storage, ammonia-borane (NH3-BH3) appears to be one of the promising candidates as it can release hydrogen throughout hydrolysis in the presence of suitable catalyst under mild conditions. Herein we report, for the first time, the preparation and characterization of palladium(0) nanoparticles supported on nanohydroxyapatite and their catalytic use in the hydrolysis of ammonia-borane under air at room temperature. These new palladium(0) nanoparticles were generated in situ during the catalytic hydrolysis of ammonia-borane starting with palladium(II) immobilized nanohydroxyapatite. The preliminary characterization of the palladium(0) nanoparticles supported on nanohydroxyapatite was done by the combination of complimentary techniques, which reveals that the formation of well-dispersed Pd(0)NPs nanoparticles (1.41 +/- 0.52 nm) on the surface of hydroxyapatite nanospheres (60-150 nm). The resulting palladium nanocatalyst achieves hydrogen generation from the hydrolysis of ammonia-borane with an initial turnover frequency value (TOF) of 11 mol H-2 mol(-1) Pd x min at room temperature under air. In addition to their high activity, the catalytic lifetime experiment showed that they can also act as a long-lived heterogeneous catalyst for this reaction (TTON = 14,200 mol H-2 mol(-1) Pd) at room temperature under air. More importantly, nanohydroxyapatite- supported palladium(0) nanoparticles were found to be highly stable against to leaching and sintering throughout the catalytic runs that make them isolable, bottleable, and reusable heterogeneous catalyst for the hydrolysis of ammonia-borane.
Citation Count: 136
Pd-mno_x< Nanoparticles Dispersed on Amine-Grafted Silica: Highly Efficient Nanocatalyst for Hydrogen Production From Additive-Free Dehydrogenation of Formic Acid Under Mild Conditions
(Elsevier Science Bv, 2015) Bulut, Ahmet; Kaya, Murat; Yurderi, Mehmet; Karatas, Yasar; Zahmakiran, Mehmet; Kivrak, Hilal; Gulcan, Mehmet; Kaya, Murat; Chemical Engineering
Herein we report the development of a new highly active, selective and reusable nanocatalyst for additive-free dehydrogenation of formic acid (HCOOH), which has great potential as a safe and convenient hydrogen carrier for fuel cells, under mild conditions. The new catalyst system consisting of bimetallic Pd-MnOx nanoparticles supported on aminopropyl functionalized silica (Pd-MnOx/SiO2-NH2) was simply and reproducibly prepared by deposition-reduction technique in water at room temperature. The characterization of Pd-mnO(x)/SiO2-NH2 catalyst was done by the combination of multipronged techniques, which reveals that the existence of highly crystalline individually nucleated Pd(0) and MnOx nanoparticles (d(mean) = 4.6 +/- 1.2 nm) on the surface of aminopropyl functionalized silica. These supported Pd-MnOx nanoparticles can catalyze the additive-free dehydrogenation of formic acid with record activity (TOF = 1300 h(-1)) at high selectivity (>99%) and conversion (>99%) under mild conditions (at 50 degrees C and under air). Moreover, easy recovery plus high durability of these supported Pd-MnOx nanoparticles make them a reusable heterogeneous catalyst in the additive-free dehydrogenation of formic acid. (C) 2014 Elsevier B.V. All rights reserved.
Citation Count: 122
Pdau-mno_x< Nanoparticles Supported on Amine-Functionalized Sio₂ for the Room Temperature Dehydrogenation of Formic Acid in the Absence of Additives
(Elsevier Science Bv, 2016) Karatas, Yasar; Bulut, Ahmet; Yurderi, Mehmet; Ertas, Ilknur Efecan; Alal, Orhan; Gulcan, Mehmet; Zahmakiran, Mehmet
Formic acid (HCOOH) has recently been suggested as a promising hydrogen carrier for fuel cell applications. However efficient hydrogen production through the decomposition of formic acid in the absence of additives under mild thermodynamic conditions constitutes a major challenge because of the ease poisoning of active metals with CO formed as intermediate during formic acid decomposition. Recently, we have reported (App. Catal. B: Env. 164 (2015) 324) our discovery that the separately nucleated MnOx nanoparticles act as CO-sponge around catalytically active Pd nanoparticles exist on the same support and enhances both the activity and CO-resistivity of Pd nanoparticles. Using this important finding, herein, we present a new catalyst system consists of the physical mixture of PdAu alloy and MnOx nanoparticles supported on amine-grafted silica (PdAu-MnOx/N-SiO2) for the room temperature dehydrogenation of formic acid in the absence of any additives. PdAu-MnOx/N-SiO2 catalyst was simply prepared by deposition-reduction technique in water at room temperature with high reproducibility and characterized by the combination of various spectroscopic tools including ICP-OES, P-XRD, DR/UV-vis, XPS, BFTEM, STEM-EDX, STEM-line analysis and CO-stripping voltammetry techniques. The sum of their results shows that the formation of physical mixture of PdAu alloy and MnOx (dmean=2.2 nm) nanoparticles on the surface of support material. This new catalytic material facilitates the hydrogen liberation through the additive-free formic acid dehydrogenation at room temperature with previously unprecedented activity (TOF=785 mol H-2 mol catalyst(-1) h(-1)), converging to that of the existing state of the art homogenous catalysts. This new superior catalytic system enables facile catalyst recovery and very high stability against agglomeration, leaching and CO poisoning, which make it highly reusable catalyst (retains >92% activity and 85% conversion at the 5th catalytic reuse) in the additive-free formic acid dehydrogenation at room temperature. (C) 2015 Elsevier B.V. All rights reserved.