Namlu, Ramazan HakkiKilic, Zekai Murat2026-02-052026-02-0520262075-170210.3390/machines14010064https://doi.org/10.3390/machines14010064https://hdl.handle.net/20.500.14411/11126Inconel 718 is widely utilized in critical engineering sectors, particularly aerospace, owing to its exceptional creep resistance, corrosion resistance, and retention of mechanical strength at elevated temperatures. However, its high hardness, low thermal conductivity, and strong work-hardening tendency make it extremely difficult to machine using conventional techniques. Ultrasonic Vibration-Assisted Machining (UVAM) has emerged as an effective strategy to overcome these limitations by superimposing high-frequency, low-amplitude vibrations onto the cutting process. Depending on the vibration direction, UVAM can significantly change chip formation, tool-workpiece interaction, and surface integrity. In this study, the influence of three UVAM modes-longitudinal (Z-UVAM), feed-directional (X-UVAM), and multi-axial (XZ-UVAM)-on the machining behavior of Inconel 718 was systematically investigated. The findings reveal that XZ-UVAM provides the most advantageous outcomes, primarily due to its intermittent cutting mechanism. Compared with Conventional Machining (CM), XZ-UVAM reduced cutting forces by up to 43% and areal surface roughness by 37%, while generating surfaces with more uniform topographies and smaller peak-to-valley variations. Furthermore, UVAM enhanced subsurface microhardness as a result of the surface hammering effect, which may improve fatigue performance. XZ-UVAM also effectively minimized burr formation, demonstrating its potential for high-quality, sustainable, and efficient machining of Inconel 718.eninfo:eu-repo/semantics/openAccessUltrasonic Vibration-Assisted MachiningInconel 718Cutting ForceSurface IntegrityMicrohardnessBurr FormationArticle