Evci, CelalEvci, C.Uyandiran, I.Department of Mechanical Engineering2024-07-052024-07-052017497807354147780094-243X10.1063/1.49754292-s2.0-85015973360https://doi.org/10.1063/1.4975429https://hdl.handle.net/20.500.14411/624Impact damage is one of the major concerns that should be taken into account with the new aircraft and spacecraft structures which employ ever-growing use of composite materials. Considering the thermal loads encountered at different altitudes, both low and high temperatures can affect the properties and impact behavior of composite materials. This study aims to investigate the effect of temperature and impactor diameter on the impact behavior and damage development in balanced and symmetrical CERT' laminates which were manufactured by employing vacuum bagging process with autoclave cure. Instrumented drop-weight impact testing system is used to perform the low velocity impact tests in a range of temperatures ranged from 60 down to -50 degrees C. Impact tests for each temperature level were conducted using three different hemispherical impactor diameters varying from 10 to 20 mm Energy profile method is employed to determine the impact threshold energies for damage evolution. The level of impact damage is determined from the dent depth on the impacted face and delamination damage detected using ultrasonic C-Scan technique. Test results reveal that the threshold of penetration energy, main failure force and delamination area increase with impactor diameter at all temperature levels. No clear influence of temperature on the critical force thresholds could be derived. However, penetration threshold energy decreased as the temperature was lowered. Drop in the penetration threshold was more obvious with quite low temperatures. Delamination damage area increased while the temperature decreased from +60 degrees C to-50 degrees C.eninfo:eu-repo/semantics/openAccessImpact behaviorCFRP laminatesImpact damageEnergy thresholdsTemperature effectConference ObjectQ41809WOS:000405202000014