191 results
Search Results
Now showing 1 - 10 of 191
Article On Optimal Allocation of Redundancies in Random Weighted Coherent Systems(Wiley, 2026) Sahoo, Tanmay; Hazra, Nil Kamal; Balakrishnan, NarayanaswamyUnlike the ordinary coherent systems, a random weighted coherent system captures components' disparity. Its performance is measured by some appropriate measure of contributions made by all of its components. In this paper, we consider random weighted coherent systems, defined based on the survival capacity, with three different survival mechanisms, namely, Types-I, II, and III. Then, we study the optimal active redundancy allocation policy as well as the optimal assembly method of random weights in a random weighted coherent system. We provide several numerical examples to illustrate all the results established here.Article Citation - WoS: 4Citation - Scopus: 4A New Extended δ-shock Model With the Consideration of Shock Magnitude(Wiley, 2024) Lorvand, Hamed; Eryilmaz, SerkanIn this article, a new delta$$ \delta $$-shock model that takes into account the magnitude of shocks is introduced and studied from reliability perspective. According to the new model, the system breaks down if either a shock after non-critical shock occurs in a time length less than delta 1$$ {\delta}_1 $$ or a shock after a critical shock occurs in a time length less than delta 2,$$ {\delta}_2, $$ where delta 1Article Citation - WoS: 9Citation - Scopus: 10Investigation of the Performance of High-Temperature Electrochemical Hydrogen Purification From Reformate Gases(Wiley, 2022) Durmus, Gizem Nur Bulanik; Durmuş, Gizem Nur Bulanık; Colpan, C. Ozgur; Devrim, Yilser; Devrim, Yılser; Durmuş, Gizem Nur Bulanık; Devrim, Yılser; Mechanical Engineering; Energy Systems Engineering; Mechanical Engineering; Energy Systems EngineeringIn the present work, the purification of hydrogen from a hydrogen/carbon dioxide/carbon monoxide (H-2:CO2:CO) mixture by a high-temperature electrochemical purification (HT-ECHP) system is examined. Electrochemical H-2 purification experiments were carried out in the temperature range of 140-180 degrees C. The effects of the molar ratio of the gases in the mixture (H-2:CO2:CO-75:25:0, H-2:CO2:CO-72:26:2,0 H-2:CO2:CO-75:22:3, H-2:CO2:CO-75:20:5, H-2:CO2:CO-97:0:3, H-2:CO2:CO-95:0:5) and the operating temperature on the electrochemical H-2 separation were investigated. As a result of the electrochemical H-2 purification experiments, it was determined that the operating temperature is the most important parameter affecting the performance. According to the results obtained, H-2 purity of 99.999% was achieved at 160 degrees C with the reformate gas mixture containing 72% H-2, 26% CO2, and 2% CO by volume. According to the polarization curves of the gas mixtures containing CO, high current densities at low voltage were reached at 180 degrees C, and it was observed that the performance increased as the temperature increased, whereas the gas mixture without CO gave the best performance at 160 degrees C.Article Baby Steps of Parenting: Turkish Adaptation of Infancy Parenting Styles Questionnaire and Mother- and Infant-Related Characteristics Affecting Parenting in Infancy(Wiley, 2025) Bahtiyar-Saygan, BaharThe crucial importance of parenting for human development is well known, yet there has been little investigation, particularly regarding infancy parenting. This study investigates mother- and infant-related characteristics affecting parenting styles in the first year after birth. Additionally, adapting an Infancy Parenting Styles Questionnaire (IPSQ) to Turkish is aimed. In total, 110 mothers with babies in the first year of their lives (M age in months = 6.39, SDage in months = 3.72; 70 girls) participated in the study. Mothers filled out the IPSQ, Early Parenting Attitudes Questionnaire (EPAQ), Karitane Parental Self-Confidence Scale (KPSC), and Parental Stress Index-Short Form (PSI-SF). Four components emerged: involvement, discipline, anxiety, and routine. The IPSQ was found to be reliable (alpha = .81) and valid. The findings revealed that income, the number of children, and parental confidence were significant predictors for involvement; maternal education, parental confidence, parenting stress, and sleep wellness of the baby were significant predictors for discipline; and the number of caregivers and parental confidence were significant predictors for routine sub-components. Also, results indicated higher involvement and lower discipline in primiparous compared to multiparous mothers. The findings were discussed in light of the literature regarding the antecedents of parenting and its developmental outcomes.Article Citation - WoS: 8Citation - Scopus: 9Contribution of Surface Silanization Process on Mechanical Characteristics of Tpu-Based Composites Involving Feldspar and Quartz Minerals(Wiley, 2023) Bouzmane, Hajar; Tirkes, Suha; Yilmaz, Volkan Murat; Tayfun, Umit; Tirkes, SehaIn this study, quartz and feldspar powders were surface treated using a silane coupling agent to achieve a more compatible mineral surface with the polymer matrix. Details of surface characteristics of minerals were examined by energy-dissipative X-ray spectroscopy, contact angle measurements, and infrared spectroscopy. Thermoplastic polyurethane-TPU was compounded with minerals using the melt-blending technique. Mechanical, thermo-mechanical, melt-flow, and morphological characterizations of TPU and relevant composites were performed by utilizing tensile and Shore hardness tests, dynamic mechanical analysis (DMA), melt flow index (MFI) measurements, and scanning electron microscopy (SEM), respectively. Water repellency of TPU and composites were also evaluated experimentally. Effects of surface treatments were discussed by comparing the results of composites filled with pristine and modified minerals. Results revealed that enrichment of quartz and feldspar surfaces confer mechanical and thermo-mechanical performance of composites. Mineral inclusions caused no drastic changes to the MFI parameter of TPU. The silane layer on the mineral surface displayed a barrier effect to water uptake of composites. Homogeneous dispersion and improved interfacial adhesion of mineral particles to the TPU phase were confirmed with help of SEM observations. Quartz exhibited slightly higher performance thanks to its silica-rich composition. The findings of this research exhibited the considerable influence of the silane layer on the mineral surface on the mechanical performance of TPU-based composites.Article Citation - WoS: 5Citation - Scopus: 6On the Design and Effectiveness of Simulink-Based Educational Material for a Communication Systems Course(Wiley, 2020) Coruk, R. Busra; Yalcinkaya, Bengisu; Kara, AliThe methods used in engineering education have gained diversity in parallel with rapidly evolving technology. New technological methods along with the traditional methods have been adopted for undergraduate education. Today, Simulink-based educational materials are used in many fields in engineering education. However, in the literature, the contribution of such educational materials to the learning process has not been measured thoroughly. This study presents a comprehensive measurement method to improve the created course material and show the effectiveness of developed course material in students' success. First, educational material was developed for an undergraduate electrical engineering course: communication systems. A feedback group made up of diverse student learners was employed extensively in the material development phase. Next, the impact of the developed material on the success of the students was examined using both qualitative and quantitative measurement tools including questionnaires, one-to-one interviews, and class and university level anonymous surveys. This also included students' performance regarding laboratory quizzes and achievement of course learning outcomes. Overall, the measurement results show that the course material increased students' success in the course. Moreover, students' general perception of the course material was positive.Article Citation - WoS: 3Citation - Scopus: 3Expectancy From, and Acceptance of Augmented Reality in Dental Education Programs: a Structural Equation Model(Wiley, 2024) Toker, Sacip; Akay, Canan; Basmaci, Fulya; Kilicarslan, Mehmet Ali; Mumcu, Emre; Cagiltay, Nergiz ErcilObjectiveDental schools need hands-on training and feedback. Augmented reality (AR) and virtual reality (VR) technologies enable remote work and training. Education programs only partially integrated these technologies. For better technology integration, infrastructure readiness, prior-knowledge readiness, expectations, and learner attitudes toward AR and VR technologies must be understood together. Thus, this study creates a structural equation model to understand how these factors affect dental students' technology use.MethodsA correlational survey was done. Four questionnaires were sent to 755 dental students from three schools. These participants were convenience-sampled. Surveys were developed using validity tests like explanatory and confirmatory factor analyses, Cronbach's alpha, and composite reliability. Ten primary research hypotheses are tested with path analysis.ResultsA total of 81.22% responded to the survey (755 out of 930). Positive AR attitude, expectancy, and acceptance were endogenous variables. Positive attitudes toward AR were significantly influenced by two exogenous variables: infrastructure readiness (B = 0.359, beta = 0.386, L = 0.305, U = 0.457, p = 0.002) and prior-knowledge readiness (B = -0.056, beta = 0.306, L = 0.305, U = 0.457, p = 0.002). Expectancy from AR was affected by infrastructure, prior knowledge, and positive and negative AR attitudes. Infrastructure, prior-knowledge readiness, and positive attitude toward AR had positive effects on expectancy from AR (B = 0.201, beta = 0.204, L = 0.140, U = 0.267, p = 0.002). Negative attitude had a negative impact (B = -0.056, beta = -0.054, L = 0.091, U = 0.182, p = 0.002). Another exogenous variable was AR acceptance, which was affected by infrastructure, prior-knowledge preparation, positive attitudes, and expectancy. Significant differences were found in infrastructure, prior-knowledge readiness, positive attitude toward AR, and expectancy from AR (B = 0.041, beta = 0.046, L = 0.026, U = 0.086, p = 0.054).ConclusionInfrastructure and prior-knowledge readiness for AR significantly affect positive AR attitudes. Together, these three criteria boost AR's potential. Infrastructure readiness, prior-knowledge readiness, positive attitudes toward AR, and AR expectations all increase AR adoption. The study provides insights that can help instructional system designers, developers, dental education institutions, and program developers better integrate these technologies into dental education programs. Integration can improve dental students' hands-on experience and program performance by providing training options anywhere and anytime.Article Synthesis, Photophysical Properties, and Photodynamic Therapy Efficacies of Meso-Pyridine Bodipys and Their Ruthenium Complexes(Wiley, 2025) Aksoy, Burcu Topaloglu; Ozcan, Emrah; Bulut, Onur; Kazan, Hasan Huseyin; Cosut, BunyeminPhotodynamic therapy (PDT) is a candidate approach for cancer treatment. In PDT applications, a fluorescent molecule, called photosensitizer (PS), induces light-directed production of reactive species, resulting in cytotoxicity. Having tunable fluorescence and easy derivatization properties, the BODIPY core is widely used as a PS. To further increase the light-induced toxicity, studies have shown the conjugation of heavy metals to the BODIPY core. However, such complexes are still needed to fully figure out their potential. In the current study, as part of an ongoing one, two novel ruthenium-BODIPY complexes were synthesized and characterized by structural, photophysical, and biological methods. To obtain complex structures between ruthenium dimers and BODIPY units, [RuCl2(p-cymene)](2) dimers, and non-iodo and di-iodo BODIPY derivatives were reacted in methanol-tetrahydrofuran (THF) medium. Photophysical properties, fluorescence lifetime, molar extinction coefficient, photostability, and capability of singlet oxygen generation were determined using absorption and/or fluorescence spectroscopy. Besides, the structures of the complexes were further clarified by the single-crystal X-ray technique. The cytotoxicity of compounds was examined against the human cervical cancer cell line, HeLa, and breast cancer cell line, MDA-MB-231, both in the dark and by light irradiation. Accordingly, both precursors and their ruthenium complexes were light-dependent toxic; nevertheless, di-iodinated meso-pyridine-substituted BODIPYs displayed light-independent toxicity by long-term treatments. Moreover, the effects of the complexes were cell-specific and the toxicities of di-iodinated BODIPY complexes were inversely correlated with the concentrations, underlying a possible aggregation and/or unpredicted cellular interaction pattern. These results emphasize that further functionalization and molecular characterization of BODIPY-ruthenium complexes are still required for PDT applications.Article Citation - WoS: 58Citation - Scopus: 66Country-Level and Individual-Level Predictors of Men's Support for Gender Equality in 42 Countries(Wiley, 2020) Kosakowska-Berezecka, Natasza; Besta, Tomasz; Bosson, Jennifer K.; Jurek, Pawel; Vandello, Joesph A.; Best, Deborah L.; Zukauskiene, RitaMen sometimes withdraw support for gender equality movements when their higher gender status is threatened. Here, we expand the focus of this phenomenon by examining it cross-culturally, to test if both individual- and country-level variables predict men's collective action intentions to support gender equality. We tested a model in which men's zero-sum beliefs about gender predict reduced collective action intentions via an increase in hostile sexism. Because country-level gender equality may threaten men's higher gender status, we also examined whether the path from zero-sum beliefs to collective action intentions was stronger in countries higher in gender equality. Multilevel modeling on 6,734 men from 42 countries supported the individual-level mediation model, but found no evidence of moderation by country-level gender equality. Both country-level gender equality and individual-level zero-sum thinking independently predicted reductions in men's willingness to act collectively for gender equality.Article Citation - WoS: 38Citation - Scopus: 59Career Abandonment Intentions among Software Workers(Wiley, 2014) Colomo-Palacios, Ricardo; Casado-Lumbreras, Cristina; Misra, Sanjay; Soto-Acosta, PedroWithin the software development industry, human resources have been recognized as one of the most decisive and scarce resources. Today, the retention of skilled IT (information technology) personnel is a major issue for employers and recruiters as well, since IT career abandonment is a common practice and means not only the loss of personnel, knowledge, and skills, but also the loss of business opportunities. This article seeks to discover the main motivations young practitioners abandon the software career. To achieve this objective, two studies were conducted. The first study was qualitative (performed through semistructured interviews) and intended to discover the main variables affecting software career abandonment. The second study was quantitative, consisting of a Web-based survey developed from the output of the first study and administered to a sample of 148 IT practitioners. Results show that work-related, psychological, and emotional variable are the most relevant group of variables explaining IT career abandonment. More specifically, the three most important variables that motivate employees to abandon the career are effort-reward imbalance, perceived workload, and emotional exhaustion. In contrast, variables such as politics and infighting, uncool work, and insufficient resources influence to a lesser extent the decision to leave the career. (c) 2012 Wiley Periodicals, Inc.
