Browsing by Author "Yilmaz, A."
Now showing 1 - 2 of 2
- Results Per Page
- Sort Options
Article Citation Count: 47The effect of synthesis and doping procedures on thermoluminescent response of lithium tetraborate(Elsevier Science Sa, 2011) Özbayoğlu, Gülhan; Yilmaz, A.; Ozbayoglu, G.; Energy Systems EngineeringLithium tetraborate has been a scientific focus since 1960s by the courtesy of the thermoluminescence property it possesses. Moreover, it is utilized in surface acoustic wave apparatuses, in sensor sector and in laser technology owing to its non-linear optical characteristics. For the uses in thermoluminescence dosimetry lithium tetraborate is activated by addition of a variety of metals as dopants. This study includes the synthesis of lithium tetraborate by two methods (high temperature solid state synthesis and water/solution assisted synthesis), doping of activators into the matrix material synthesized and characterization of the products. Lithium tetraborate is readily commercially available in TL (Themoluminescence) dosimetry; hence, the main aim in this study was to specify the effect of synthesis and doping methods on the TL response. The heating temperature for the synthesis was 750 degrees C and the retention time as selected as 4 h for both methods. The synthesis stages were followed by doping step where the compounds of Cu, Ag and In in different proportions were doped in lithium tetraborate by solid state and solution assisted doping techniques. Characterization of the product was achieved by X-ray diffraction (XRD). Fourier transform Infra Red Spectroscopy (FT-IR) and Scanning Electron Microscopy (SEM) techniques. All samples prepared displayed TL response and the best TL signal was obtained from the sample produced by solid state synthesis and doped by solution assisted method with 0.1% Cu and 0.004% Ag. (C) 2010 Elsevier B.V. All rights reserved.Conference Object Citation Count: 5Synthesis, characterizations and investigation of thermoluminescence properties of strontium pyrophosphate doped with metals(Pergamon-elsevier Science Ltd, 2014) Özbayoğlu, Gülhan; Ozbayoglu, G.; Yilmaz, A.; Energy Systems EngineeringStrontium pyrophosphate, Sr2P2O7, was synthesized by solid-state synthesis method; the product was co-doped with copper-silver (Cu-Ag), copper-indium (Cu-In) and manganese-praseodymium (Mn-Pr) oxides (CuO, MnO, In2O3, Pr6O11 and AgNO3) by solid-state reaction method. The variation of dopant concentrations was investigated from 0.5 to 15% by weight. In addition to these processes, chemical characterizations of samples and the investigation of thermoluminescence (TLD) properties of strontium pyrophosphate with and without dopants were conducted. For the characterization; powder X-ray Diffraction (XRD) were implemented for phase purity of samples. Fourier Transform Infrared Spectroscopy (FTIR) was used to determine whether the bond structures were affected from the doping or not. Thermoluminescence (TLD) analyses were conducted on strontium pyrophosphate doped with different amounts of dopants for the first time. Glow curves showed that intensities were affected by different amounts of dopants. It can be concluded from that strontium pyrophosphate doped with 7% MnO and 1% Pr6O11 had the most powerful peak intensity around 160 degrees C and dosimetric property for promising application. (C) 2014 Elsevier Ltd. All rights reserved.