Browsing by Author "Ercelebi, C."
Now showing 1 - 4 of 4
- Results Per Page
- Sort Options
Article Citation Count: 6Construction of self-assembled vertical nanoflakes on CZTSSe thin films(Iop Publishing Ltd, 2019) Sürücü, Özge; Surucu, O. Bayrakli; Güllü, Hasan Hüseyin; Abak, M. K.; Gullu, H. H.; Ercelebi, C.; Parlak, M.; Electrical-Electronics Engineering; Department of Electrical & Electronics EngineeringCu2ZnSn(S, Se)(4) (CZTSSe) is a promising alternative absorber material to achieve high power conversion efficiencies, besides its property of involving low-cost and earth-abundant elements when compared to Cu(In, Ga) Se-2 (CIGS) and cadmium telluride (CdTe), to be used in solar cell technology. In this study, a novel fabrication technique was developed by utilizing RF sputtering deposition of CZTSSe thin films having a surface decorated with self-assembled nanoflakes. The formation of nanoflakes was investigated by detailed spectroscopic method of analysis in the effect of each stacked layer deposition in an optimized sequence and the size of nanoflakes by an accurate control of sputtering process including film thickness. Moreover, the effects of substrate temperature on the formation of nanoflakes on the film surface were discussed at a fixed deposition route. One of the main advantages arising from the film surface with self-assembled nanoflakes is the efficient light trapping which decreases the surface reflectance. As a result of the detailed production and characterization studies, it was observed that there was a possibility of repeatable and controllable fabrication sequence for the preparation of CZTSSe thin films with self-textured surfaces yielding low surface reflectance.Article Citation Count: 9CZTSSe thin films fabricated by single step deposition for superstrate solar cell applications(Springer, 2019) Sürücü, Özge; Surucu, O. Bayrakli; Güllü, Hasan Hüseyin; Gullu, H. H.; Ciftpinar, E. H.; Ercelebi, C.; Parlak, M.; Electrical-Electronics Engineering; Department of Electrical & Electronics EngineeringThe focus of this study is the characterization of Cu2ZnSn(S,Se)(4) (CZTSSe) thin films and fabrication of CZTSSe solar cell in superstrate configuration. In this work, superstrate-type configuration of glass/ITO/CdS/CZTSSe/Au was entirely fabricated by totally vacuum-based process. CZTSSe absorber layers were grown by RF magnetron sputtering technique using stacked layer procedure. SnS, CuSe and ZnSe solid targets were used as precursors and no additional step like the selenization process was applied. The structural and morphological properties of deposited CZTSSe layers were analyzed using X-ray diffraction (XRD), Raman scattering, scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy analysis (EDS) measurements. The optical and electrical properties of the CZTSSe thin films were investigated by UV-Vis spectroscopy, Hall-Effect and photoconductivity measurements. In addition, the device performance of the fabricated superstrate solar cell was examined.Article Citation Count: 7FABRICATION AND CHARACTERIZATION OF TiO2 THIN FILM FOR DEVICE APPLICATIONS(World Scientific Publ Co Pte Ltd, 2019) Güllü, Hasan Hüseyin; Gullu, H. H.; Coskun, E.; Parlak, M.; Ercelebi, C.; Department of Electrical & Electronics EngineeringTitanium oxide (TiO2) film was deposited by rectification factor (RF) magnetron sputtering technique on glass substrates and p-Si (111) wafers to fabricate n-TiO2/p-Si heterojunction devices for the investigation of material and device properties, respectively. The structural, surface morphology, optical and electrical properties of TiO(2 )film were characterized by means of scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffraction (XRD), UV-visual (UV-Vis) spectral and dark current-voltage (I-V) measurement analyses. The deposited film layer was found to be homogeneous structure with crack-free surface. The bandgap value of TiO2 film was determined as 3.6 eV and transmission was around 65-85% in the spectral range of 320-1100 nm. The conductivity type of the deposited film was determined as n-type by hot probe method. These values make TiO2 film a suitable candidate as the n-type window layer in possible diode applications. TiO2 film was also deposited on p-Si (111) wafer to obtain Al/n-TiO2/p-Si/Al heterojunction device structure. The dark I-V characteristic was studied to determine the possible conduction mechanisms and diode parameters.Conference Object Citation Count: 4Temperature-dependent material characterization of CuZnSe2 thin films(Elsevier Science Sa, 2020) Sürücü, Özge; Surucu, O.; Işık, Mehmet; Isik, M.; Güllü, Hasan Hüseyin; Gasanly, N. M.; Parlak, M.; Electrical-Electronics Engineering; Department of Electrical & Electronics EngineeringIn the present work, CuZnSe2 (CZSe) thin films were co-deposited by magnetron sputtering of ZnSe and Cu targets. The structural analyses resulted in the stoichiometric elemental composition and polycrystalline nature without secondary phase contribution in the film structure. Optical and electrical properties of CZSe thin films were investigated using temperature-dependent optical transmission and electrical conductivity measurements. The band gap energy values were obtained using transmittance spectra under the light of expression relating absorption coefficient to incident photon energy. Band gap energy values were found in decreasing behavior from 2.31 to 2.27 eV with increase in temperature from 10 to 300 K. Temperature-band gap dependency was evaluated by Varshni and O'Donnell models to detail the optical parameters of the thin films. The experimental dark and photoconductivity values were investigated by thermionic emission model over the grain boundary potential. Room temperature conductivity values were obtained in between 0.91 and 4.65 ( x 10(-4) Omega(-1)cm(-1)) under various illumination intensities. Three different linear conductivity regions were observed in the temperature dependent profile. These linear regions were analyzed to extract the activation energy values.